Neptune + DOS Stirrer + Trident 2-part Dosing

[AustinJT]

Hi... I have some questions on how to dose C-balance with Trident. How do you program it? By having Trident dosing equal amount of Part A & Part B on KH only or Calcium only? Since system in on CRx, would it be more ideal to have DOS dose on Calcium, instead of KH? Or...?

Does any know to properly control Apex DOS to dose while working with Auto-stir Dosing Container? Can we DOS dosing schedule to trigger specific Outlet that attach to DIY Stir or if there is an original option for it? I want to dose a trace elemental solution, it required us to vigorously shake before do.

Please share your thoughts.

Thanks in advance!

 

[Jason_MrFrags]

Why can't you just have A&B set to dose independently based on the Trident reading.

Figure out what you want your numbers to be. Then set a dosing table, I have mine divided into 4x 6hr blocks, based on testing schedule.

Under advanced you can add if alk3> 8.5 then off or if cal3>400 then off

Yes you can also program under advance to dose x amount after Y event is triggered. Need to setup a Profile for the volume. If Y then Dos125(profile)

 

[Randy Holmes-Farley]

I would dose both equally based on alk only, and then if a correction is needed over a few weeks, make it manually.

 

[AustinJT]

Why can't you just have A&B set to dose independently based on the Trident reading.

Figure out what you want your numbers to be. Then set a dosing table, I have mine divided into 4x 6hr blocks, based on testing schedule.

Under advanced you can add if alk3> 8.5 then off or if cal3>400 then off

Yes you can also program under advance to dose x amount after Y event is triggered. Need to setup a Profile for the volume. If Y then Dos125(profile)

But 2-parts are supposed to dose on Equal Amount so they work by balancing each other. No?