Hi everyone, im a long time reefer, but took a break for a bit, and came back.
I started reefing in 1996, then went on haitus after college.
Swore i would never pick up the hobby again, because of the immense amount of time and work required for a reef tank.
Well that thought went south in 2017 when i decided to go Small on a 24G cube.
Now like all reefers, you get greedy as the hobby progresses, and i miss having Tangs.
So I decided to go big, but not too big. Large enough for some Tangs.
I decided to hold on the Work Log until i was just about ready to cycle the tank, as i did not have consecutive days to work on it.
But i am now just about at that part.
So Enjoy, and your feedback is greatly appreciated.
Tank: Innovative Marine 150g Lagoon
Lights: Ecotech Radeon XR30 G6 Blue x 2
Power Head: Ecotech Vortech MP40 QD. x 2
Sump: Innovative Marine RFS-39
Skimmer: Simplicity 120 (I might need a larger skimmer)
Controller: Neptune Apex A3 or A3 Pro (not really sure which one at the moment, someone convince me the extra 300 is worth it)\
Tester: Neptune Trident
Doser: Neptune DoS with DDR
(I want to let Neptune do the 2 part dosing without me having to check and change the doser manually.)
Or should i go Hydros X10 with a Alkatronic and Dosetronic? I may start a war asking this question.
Like how most WIP start's, here is the Package unopened.
Came nicely packed, had a LOT of styrofoam that needed to be disposed of in a span of 3 weeks.
The freight guy said i was the first drop, so i felt lucky as it meant my package was packed last, in the Last In, First Out order freight delivery guys do.
I had to call 4 professional movers to lift the 300lb tank on top of the stand.
The stand was not fun to install, as i had to take it appart and reassemble it couple of times.
RITFM did not apply, as i did read the manual, and it took a few Youtube Videos to clearify some things.
But the tank looks like this on top of the stand.
Lined the bottom of the stand with table cover PVC film.
The tank is about 1 feet away from the rear wall as the piping took up about 7 inches.
I bought about 80lbs of base rock... 20lbs of shelf rock, and 20lbs of rubble.
I think i ended up using half... remind me not to listen to BRS videos like a bible when they say about 1lb per gallon for a HNSA setup.
Using Gluemasters Thick + Accelerator and Thin + Marco NSA Powder i started playing LEGO's with Base Rock.
At first i went with this design.
Seemed a little boring so i added another NSA structure in the middle, so the finished Scape looks like this inside my Tank.
Front...
More Front...
Top Down.
Left Angle:
Right Angle
Left complete
Inside Front
Inside Right
Seemed a little shallow, so i put some shelf rock under the base foot to give it about a 1 inch lift.
I intend to have 1 inch of special grade carbsea sand.
More to Come....
I started reefing in 1996, then went on haitus after college.
Swore i would never pick up the hobby again, because of the immense amount of time and work required for a reef tank.
Well that thought went south in 2017 when i decided to go Small on a 24G cube.
Now like all reefers, you get greedy as the hobby progresses, and i miss having Tangs.
So I decided to go big, but not too big. Large enough for some Tangs.
I decided to hold on the Work Log until i was just about ready to cycle the tank, as i did not have consecutive days to work on it.
But i am now just about at that part.
So Enjoy, and your feedback is greatly appreciated.
Tank: Innovative Marine 150g Lagoon
Lights: Ecotech Radeon XR30 G6 Blue x 2
Power Head: Ecotech Vortech MP40 QD. x 2
Sump: Innovative Marine RFS-39
Skimmer: Simplicity 120 (I might need a larger skimmer)
Controller: Neptune Apex A3 or A3 Pro (not really sure which one at the moment, someone convince me the extra 300 is worth it)\
Tester: Neptune Trident
Doser: Neptune DoS with DDR
(I want to let Neptune do the 2 part dosing without me having to check and change the doser manually.)
Or should i go Hydros X10 with a Alkatronic and Dosetronic? I may start a war asking this question.
Like how most WIP start's, here is the Package unopened.
Came nicely packed, had a LOT of styrofoam that needed to be disposed of in a span of 3 weeks.
The freight guy said i was the first drop, so i felt lucky as it meant my package was packed last, in the Last In, First Out order freight delivery guys do.
I had to call 4 professional movers to lift the 300lb tank on top of the stand.
The stand was not fun to install, as i had to take it appart and reassemble it couple of times.
RITFM did not apply, as i did read the manual, and it took a few Youtube Videos to clearify some things.
But the tank looks like this on top of the stand.
Lined the bottom of the stand with table cover PVC film.
The tank is about 1 feet away from the rear wall as the piping took up about 7 inches.
I bought about 80lbs of base rock... 20lbs of shelf rock, and 20lbs of rubble.
I think i ended up using half... remind me not to listen to BRS videos like a bible when they say about 1lb per gallon for a HNSA setup.
Using Gluemasters Thick + Accelerator and Thin + Marco NSA Powder i started playing LEGO's with Base Rock.
At first i went with this design.
Seemed a little boring so i added another NSA structure in the middle, so the finished Scape looks like this inside my Tank.
Front...
More Front...
Top Down.
Left Angle:
Right Angle
Left complete
Inside Front
Inside Right
Seemed a little shallow, so i put some shelf rock under the base foot to give it about a 1 inch lift.
I intend to have 1 inch of special grade carbsea sand.
More to Come....
Last edited: