Hello Reefers,
Finally got around to replacing my lights and don't really need all the old ones, so here we go
Coralife Hybrid 72" - $200 Local pick-up only (not sure I could ship it safely)
I believe this is the Aqualight Pro model, and is equipped as follows:
1x 24" Current USA Satellite Marine Pro LED strips w/ Ramp Timer Pro - $75, local pickup
I could possibly ship these at buyer's expense if I can find an appropriate box to ship them in
24" model would be much easier to ship
1x Power supply for 48" Satellite Marine light - $20 shipped
Nothing wrong with these, just had one light go out so there's a spare timer and power supply
If anyone wants to come pickup the broken 48" to fix or for parts, it's yours. Right now, a single row of LEDs light up on one end and that's all. Maybe someone that likes to tinker with lights can use or fix it.
I'll be putting up pictures once I've had a chance to wipe things down. I do have some shots of the hybrid fixture working, it's just still dirty and on my phone. Those will be up shortly.
I may end up adding one more of each of the Current lights if I decide I don't need to keep them as spares
Finally got around to replacing my lights and don't really need all the old ones, so here we go
Coralife Hybrid 72" - $200 Local pick-up only (not sure I could ship it safely)
I believe this is the Aqualight Pro model, and is equipped as follows:
- 3x 150w Metal Halide lamps with ballasts (all working)
- 4x Compact Fluorescent lamps- these appear to be actinitic. One is out, but may just need a new bulb (switch on hood)
- MH ballasts are external with On/Off Switches
- Blue LED lamps for moonlight - one of these is out
- Fan cooling - one of the fans did rattle a bit when I turned on all 3 MH's, but may just have been due to it being up on end during testing
- 1x spare MH bulb is included
- Note 1: I'll give it a wipe down, but don't plan on replacing the CFL bulb or really taking it apart. There may be some salt creep into some seams
- Note 2: I currently have 2 of the legs, but they are broken. Might be able to use the old legs to get 3d printed replacements or something. I believe it was also possible to hang this fixture, but haven't really looked into that since I'm not using it
- Note 3: I'm not sure how many hours are on any parts of this. It was over the sump with one MH being used for a refugium when I got the tank and was removed shortly after. It's been in storage for a couple years now.
1x 24" Current USA Satellite Marine Pro LED strips w/ Ramp Timer Pro - $75, local pickup
I could possibly ship these at buyer's expense if I can find an appropriate box to ship them in
24" model would be much easier to ship
- White and blue LEDs
- does simulated sunrise, sunset and night viewing
- Good for a FOWLR setup. Doubt they would be very useful for anything photosynthetic as they're pretty low output
- Brackets are adjustable to fit a variety of widths. should match the Orbit series on size
- Note 1: The brackets have some rust on them that I'm going to try to clean up
- Note 2: There's definitely some salt creep under the protective acrylic shield. I'm not currently planning on taking the lights apart enough to clean this, but the exterior surfaces will be wiped down. That said, they provide a decent amount of light for a FOWLR setup as-is
- Note 3: Also don't know how many hours are on these lights. They ran about 12hrs/day for the 2.5 years I've had the tank
- Note 4: I did have issues with a couple of the timers drifting off of the programmed schedule. I have heard that stray IR signals (like a TV remote) can cause this, which could make sense since the problem timers were the ones closest to the living room where the TV sits. Unfortunately, I don't know which ones are which anymore so I can't promise anything regarding which timer goes with each light.
1x Power supply for 48" Satellite Marine light - $20 shipped
Nothing wrong with these, just had one light go out so there's a spare timer and power supply
If anyone wants to come pickup the broken 48" to fix or for parts, it's yours. Right now, a single row of LEDs light up on one end and that's all. Maybe someone that likes to tinker with lights can use or fix it.
I'll be putting up pictures once I've had a chance to wipe things down. I do have some shots of the hybrid fixture working, it's just still dirty and on my phone. Those will be up shortly.
I may end up adding one more of each of the Current lights if I decide I don't need to keep them as spares