Let's see all of those hard plumbed reef tanks and sump pixs ?

[FLSharkvictim]

I am getting ready to hard plumb my SCA 150 rimless tank!! I'm going to be planning on running two Return pumps in my new CL-44 Synergy sump! 1 pump for each return..

Let's see some of your tanks and how you have your tank hard plumbed using a external overflow box?

 

[Saltyreef]

Heres my recent plumbing job.
Tank still empty but things moving along quickly now

 

[FLSharkvictim]

Heres my recent plumbing job.
Tank still empty but things moving along quickly now

I have got my returns dry plumbed already and they will look like this:

 

[Saltyreef]

I have got my returns dry plumbed and was doing some dry fitting with my Synergy External Overflow box...
I am going to be starting in a few weeks plumbing this beast

Looks good!
I like the strainer. Would be good for stray chaeto and large particles of anything else.
I think the plastic inserts come in different microns too.
I used the synergy box too
Mines all glued now.
Hindsight I should have added a few more unions so all my gates are positionable at any time, i had an issue with the valve not being 100% square with the back of tank. But its ok since the plumbing isnt visable from the front lol.

 

[FLSharkvictim]

Looks good!
I like the strainer. Would be good for stray chaeto and large particles of anything else.
I think the plastic inserts come in different microns too.
I used the synergy box too
Mines all glued now.
Hindsight I should have added a few more unions so all my gates are positionable at any time, i had an issue with the valve not being 100% square with the back of tank. But its ok since the plumbing isnt visable from the front lol.

Care to share a few pics of your system?

 

[40g Nano]

Need to replace 1 segment with blue, but here it is!

 

[DIAZ REEF]

Still in progress!

 

[DIAZ REEF]

Need to replace 1 segment with blue, but here it is!

Super clean!

 

[Hydrahawk]

 

[RobB'z Reef]

 

[DIAZ REEF]

Super nice!!

 

[RobB'z Reef]

Super nice!!

Thank you good sir!

 

[Saltyreef]

Care to share a few pics of your system?

Pics in my first post

 

[FLSharkvictim]

@Hydrahawk & Rob.bucek
nice set up brothers!!
Ones my tank is all plumbed and I will be dropping in one of Buds L-2 Rev4 Turbo Scrubbers!! I had Synergy custom make me some brackets so it will fit on top of my sump..

Here some pictures of me doing a dry fit run on my sump

 

[40g Nano]

Super clean!

Thanks

 

[fishybizzness]

My 120 when I had just started setting it up last year. Each side of the manifold can rotate up to 180° via a union depending on what I'm running at the time. It can be in the up position to keep it out of the way until needed. I used regular white pvc to match the inside of the stand.

 

[Travis Wagner]

Not to derail the thread, but any advice for how to hard plumb from the return pump and have it be the perfect length? I always end with the pump sitting off center or an inch off the ground when I finish

 

[Lost in the Sauce]

I am getting ready to hard plumb my SCA 150 rimless tank!! I'm going to be planning on running two Return pumps in my new CL-44 Synergy sump! 1 pump for each return..

Let's see some of your tanks and how you have your tank hard plumbed using a external overflow box?

How was the tuning on the bean animal?

 

[Griev]

Not to derail the thread, but any advice for how to hard plumb from the return pump and have it be the perfect length? I always end with the pump sitting off center or an inch off the ground when I finish

I cut and dry fit everything first, then draw a line where each piece meets the other with a sharpie. When you glue and reattach, stop at the line you drew. Should come out exactly the same.