Kessil H380, RB XHO 30", RB K30 Add on, RB 2 ch cont

[Jon's Reef]

I am selling some lights that I was using. They work great, just changing things up. Shipping included to the continental US.

Kessil H380 Fuge light with 3D printed shade
$175 shipped Sold

2x Reefbrite XHO Actinic 30"
Newer model with 32 LED in each strip (Same as 36" model)
$125 each shipped
2x Reefbrite XHO 50/50 30"
Newer model with 32 LED in each strip (Same as 36" model)
$100 each shipped

All 4: $400 shipped Sold
(Some light scratches on the clear plastic that do not effect the function or light distribution)

Reefbrite XHO K30 Actinic Add On Kit
Fits Radion XR30 or Hydra 64
$140 shipped Sold

Reefbrite 2 channel controller
Works with apex, ghl etc (0-10V)
$100 shipped

 

[Raptor72]

DM’d on H380

 

[Jon's Reef]

Kessil H380 Sold

 

[Kodski]

Are the Reef Brights actually 30"? I ask because I'd be interested in them over my 48" tank but worry about the coverage if they are only 30"

 

[Jon's Reef]

These are 30”. The same led layout as the 36”, just a shorter external length.

I will setup a quick par map to give an idea of the par out to 48”

 

[Kodski]

These are 30”. The same led layout as the 36”, just a shorter external length.

I will setup a quick par map to give an idea of the par out to 48”

I ask because I don't see a 30" XHO model listed anywhere. I'm sure I missed it, but I only see Lumilight Pro's as a 30" model. If you could do a par map that would be totally amazing. I have a shallow tank (48"x24"x16") So I'm kinda interested in going with a blanket of light approach instead of two spot lights as I know I'll end up with lots of shadowing down the road.

 

[Asuazo25]

ReefbRite xr30 still available

 

[Jon's Reef]

If you could do a par map that would be totally amazing.

Here it is. I took 1 of the actinic bars and suspended over the ground. 8", 12", 16". Then measured the par every 3".

I think if you add the glass reflection effect in, it would push the par up on the sides. Even with these over my 36" there was quite a bit of overspill. On my 30" frag tank I was using the 15" kit and had good uniform coverage.

I ask because I don't see a 30" XHO model listed anywhere. I'm sure I missed it, but I only see Lumilight Pro's as a 30" model.

They sell the 30" at Premium aquatics (link) and Champion lighting (link)

There are some older 30" that have less LED's, but they upgraded the reflectors to handle more in a smaller space... which ends up that the 30" has 32 leds and the 36" has 32 with the same placement, just longer case on the 36".

 

[Jon's Reef]

ReefbRite xr30 still available

It is pending

 

[Jon's Reef]

I have a shallow tank (48"x24"x16") So I'm kinda interested in going with a blanket of light approach instead of two spot lights as I know I'll end up with lots of shadowing down the road.

Also, I have a bracket I can throw in if you buy the 4 pack. It is made of expanded PVC, a K30 bracket kit and some aluminum pieces to hold all 4 bars. The middle is cut out for 2 A360x's so you can screw them right in and all the controls are exposed.

 

[Jon's Reef]

Reef Brite K30 add on kit sold

 

[Kodski]

Thanks so much for getting that par data! I feel like the 30" would cover ok after looking at that. I will let you know, kinda waiting on my A360x to sell to free up a bit more cash. Thanks again!

 

[Jon's Reef]

Bump

 

[Jon's Reef]

Bump

 

[Jon's Reef]

Bump

 

[Jon's Reef]

Bump

 

[Jon's Reef]

Bump

 

[Jon's Reef]

Bump