High Cal... how to lower it?

Rogued_Reefer

Valuable Member
View Badges
Joined
Jul 17, 2019
Messages
1,064
Reaction score
1,273
Location
Miami
Rating - 0%
0   0   0
Hello guys!

I have been trying to dial in my tank to stick to kalkwasser only. I accidentally dosed a bit too much calcium about 2 weeks ago which spiked my cal to 597... I been waiting out which has brought it down to 592 but I’m concerned it’s lowering too slow and will cause harm to my corals in the long run...

My alk is 7.6dkh stable with the kalkwasser I’m afraid I know the answer to my own question but I would like to hear it and get some guidance from someone who has gone through it and knows how to deal with it.

Thank you!!
 

Jenuvio

Active Member
View Badges
Joined
Feb 20, 2020
Messages
218
Reaction score
283
Location
Ventura County
Rating - 100%
1   0   0
I've had high cal in the past... didn't have any corals though, LoL
I waited it out and it stayed solid after. :D

Never heard of cal being too high.. with side affects.
If possible do a 50% water change. That should drop it to the low 500's but if your dosing it might make everything out of wack!... idk keep us updated!
 

35ppt

Large Member
View Badges
Joined
Jun 19, 2019
Messages
1,413
Reaction score
2,006
Location
Los Angeles
Rating - 0%
0   0   0
Last time I moved I had a mishap where I had to use water that had Ca of 700 and Alk of 16 or so. Tank was fine overnight and I lowered it to ~600 the next day with water from a LFS and I let it drop naturally from there, took a few weeks IIRC to drop back to normal levels but nothing was effected negatively. I would discontinue dosing to let it drop. But start dosing Alk to keep that stable.

/Tank had mostly LPS with a couple easy SPS.
 
Last edited:
OP
OP
Rogued_Reefer

Rogued_Reefer

Valuable Member
View Badges
Joined
Jul 17, 2019
Messages
1,064
Reaction score
1,273
Location
Miami
Rating - 0%
0   0   0
Thanks to everyone!

So the best route should be to stop doing kalkwasser and just dose alk until I get cal to the desired level correct?
 

Randy Holmes-Farley

Reef Chemist
View Badges
Joined
Sep 5, 2014
Messages
72,100
Reaction score
69,741
Location
Massachusetts, United States
Rating - 0%
0   0   0
Ok i see now! That’s a way cheaper way to raise alk and ph! Thanks guys

It boosts alkalinity. It does not boost pH unless you bake it first. :)
 

Randy Holmes-Farley

Reef Chemist
View Badges
Joined
Sep 5, 2014
Messages
72,100
Reaction score
69,741
Location
Massachusetts, United States
Rating - 0%
0   0   0
Yeah that’s what I read. If not baked it lowers alk but if baked (soda ash) it boost both. I’m going to give it a shot and report back in a week or two.

Baking soda raises alkalinity and gives a very slight initial pH lowering.
 

Miller535

Valuable Member
View Badges
Joined
Dec 11, 2019
Messages
2,203
Reaction score
1,939
Location
Pittsburgh, Pennsylvania
Rating - 0%
0   0   0
It's not for everyone, but I prefer to use soda ash (which does raise the ph some) instead of baking the baking soda. Baking your own baking soda is cheaper, but realistically BRS soda ash is pretty darn cheap also, and you dont have to take anything.
 
Back
Top