Getting Error on hs300 equipment add

[TCoach]

I'm trying to add control of my HS300 Kasa strip into reef-pi. I've been able to add the driver and outlets. However, I keep getting 500 errors after I add the first equipment linked to each power strip. Any ideas?

 

[fishface NJ]

let me bump this post so you get a response. I don't use reep pi. Good luck!

 

[Ranjib]

Any chance you powerstrip ip has changed?
Check if the issue resolves after reloading (not reboot). If so, it could be the reef-pi starts before the network when pi is powered up. Depending upon whats going on, we can employ specific fix

 

[TCoach]

Any chance you powerstrip ip has changed?
Check if the issue resolves after reloading (not reboot). If so, it could be the reef-pi starts before the network when pi is powered up. Depending upon whats going on, we can employ specific fix

Not sure what changed, but now it is working. I do know I had to static IP both kasa strips. But even after I did that and restarted everything, it was not working.

Something weird. Anyway, now it is working.

Thanks!

 

[Ranjib]

got it. remember those two things that can go bad, hs300 changing its ip, which we cant fix easily on reef-pi side, and second reef-pi starting before network (can be fixed by updateding the systemd unit files to make sure reef-pi starts after network).