Reply to thread

Ecotech Marine

Message: <blockquote data-quote="Derrick0580" data-source="post: 11330345" data-attributes="member: 188288"><p>Ok so tonight i noticed the drive motor screw had backed itself out again.  The fleece doesn’t have any sort of guide to keep it straight on the waste roller.  Has anyone else had this problem?  I basically unrolled about 60 feet of dirty fleece and held the advance button down to feed it back onto the scrap roller straight and added super glue to the drive motor screw hole.  I can see this easily becoming an issue for everyone as the fresh roll slides easily on the holder.  Not sure how to go about keeping it in one place and allowing it to slowly bunch up to one side or another on the waste side and jamming up the roller, in turn preventing the spool from turning freely and allowing the drive motor screw to back itself out.  If you hold the drive motor in your hand with the screw away from you it turns in a counter clockwise direction which is making it back itself out once the fleece is jammed up against either side. Trying to figure out how to keep the new fleece held in one spot so it rolls straight onto the scrap side.  I know I’m not the only one having this issue!</p></blockquote><p></p>

Verification

Legendary

Please Introduce Yourself Here!