Dream Build - Waterbox Reef LX 270.6

[dank reefer]

2020 wasn't the best year for many of us reefers.

But 2021 is going to be my year as not only do we close on our new home tomorrow, but I just hit the PAY ME NOW button on a REEF LX 270.6 with 4 XR30 Gen 5 Blue.

So out with the old and in with the new!

I want to start the build thread right this time around as this will be my dream tank build.

Here is what I know as far as hardware that will be going into this build as I'm reusing some from my current but shortly being taken offline 90g/50g lowboy. I'll plumb the frag tank separately later on.

Apex 2016 /COR-20 /DOS /ATK /PMK /WAV×2 /Trident
Geos Reef CR612X2 /CarbonDoser /FX-STP
MP40QD ×2
Upgrading skimmer to a Deltec 1500I

I know I'm a couple of months out from getting the tank and setting it up, but D@#N it feels good!

 

[YNRA]

woahhhhhh mama

following

 

[dank reefer]

Skimmer came in yesterday. This Skimmer looks like a monster!

Thanks @djray77

 

[djray77]

Skimmer came in yesterday. This Skimmer looks like a monster!

Thanks @djray77

You're very welcome, glad its all in one piece. it is a beast of a skimmer.

 

[dank reefer]

Here is the room where the tanks are going. Back wall will be for the 270, and wall on the left is where the 60g cube will be going.

The boss wants to put up wood slats on the back wall and paint them with a nautical theme. We might be looking at using PVC board instead of wood, but that's up in the air?

 

[dank reefer]

Got a 100g Stock Tank I'm going to use as a holding tank the new tank gets here. I have a buyer for the 90g and would like tonget it emptied this weekend so let's see how that works out.

Plan is to take the 90 offline, take the sump thays being used and plumb it to the stock tank and then relocate the fish and whatever corals I have left. Going to take as much water as I can from the current system to fill the stock tank, and mix fresh SW to fill the rest. Going to keep all the rock in there was well since it's been running for 3 years give or take so I should have some good bio.

I was going to get blocks to lift the tank off the ground but I saw Travtor Supply had some foam blocks that are used to transport their trailers over. Picked them up for 1.50 a piece and for of them should be enough to support the tank. Goimg to take pics of the stock tank setup if I can get to it this weekend.

 

[dank reefer]

Added bulkheads today to the stock tank and started to drain the water from the frag tank.

Good thing we are only moving 20-30 miles away, cause it was a Slow Ride!

 

[dank reefer]

 

[dank reefer]

 

[dank reefer]

 

[dank reefer]

 

[dank reefer]

Got the rest of the fish, invertebrates, and cleanup crew and moved over to the stock tank. Emptied oit the rest of the tank to get it ready for its new owner. Fell short with water to fill up the sump, so I'll be making another trip tomorrow to fill and get the sump online for the stock tank.

 

[dank reefer]

All rock has been taken out which made catching the fish so much easier. Also saw how many bristleworms this tank had

 

[dank reefer]

Need to remove sand and it's all ready

 

[dank reefer]

And almost the final product. All fish are in with rocks and coral.

 

[dank reefer]

Controller board and sump installed. Only thing running now is a gyre, a hydor wave maker, and heater. Need about 15-20 gallons of sw to get the sump running.

 

[Ed olson]

Thanks for the new"er" tank! Still has some small details to clean up and a final wipe down, then on with the a new build myself!

 

[dank reefer]

Thanks for the new"er" tank! Still has some small details to clean up and a final wipe down, then on with the a new build myself!
View attachment 2029320

I'm glad you are having fun with it Ed. can't wait to see this puppy full of water at your place.

 

[dank reefer]

Update with some pics

 

[Ed olson]

Coming along nicely!