Do I need more light?

AquaForge

Active Member
View Badges
Joined
Jan 10, 2024
Messages
192
Reaction score
169
Location
Rochester
Rating - 0%
0   0   0
I have a PAR question:
I am starting to add some coral to my tank. I have an apogee par meter that plugs into my laptop and reads out in umols which I guess is equivalent to par numbers people always refer to? Anyway. I have currently 1 Current USA 95W light above the tank. I have a spare one that I could add. Currently running about 60% blue with very little white as I have a lamp near my tank. With the lamp on these are the par numbers. Question. Should I turn up my 1 light to get higher numbers or should I add the 2nd light to spread out the "hot spot" more? Plan is to have a mixed reef tank for now I am just starting and mostly going to be softies and lps.


PAR-MAP-1.jpg
Current Light.jpg
 

Mr. Mojo Rising

7500 Club Member
View Badges
Joined
Feb 14, 2021
Messages
7,612
Reaction score
8,632
Location
Toronto
Rating - 0%
0   0   0
I think that question is somewhat subjective, but I would say yes for more light. I would aim for minimum 300 up top and 125 on the bottom minimum, but again, thats just me.
 

Ron Reefman

Lets Go Snorkeling!
View Badges
Joined
Aug 12, 2012
Messages
9,366
Reaction score
21,076
Location
SW Florida
Rating - 0%
0   0   0
If your numbers are the equivalent of PAR readings, then I would shoot for 250 just under the surface and 75 at the sand. Those would be my very minimums!
 
OP
OP
AquaForge

AquaForge

Active Member
View Badges
Joined
Jan 10, 2024
Messages
192
Reaction score
169
Location
Rochester
Rating - 0%
0   0   0
Ok I installed my other light. Its same brand but lower power. 52W vs 95W. I put the 52W one on the right side and bumped the power up from it. The left one is my main one 95W and put the power down a bit. These are the numbers I am getting now. (reused the same pic just adjusted numbers)

Current-Light2.jpg
 

Cthulukelele

2500 Club Member
View Badges
Joined
Aug 20, 2018
Messages
3,085
Reaction score
6,086
Location
Durham, North Carolina
Rating - 0%
0   0   0
Ok I installed my other light. Its same brand but lower power. 52W vs 95W. I put the 52W one on the right side and bumped the power up from it. The left one is my main one 95W and put the power down a bit. These are the numbers I am getting now. (reused the same pic just adjusted numbers)

Current-Light2.jpg
Imo these are better numbers
 
Back
Top