DIY automatic kh tester

[axlzys]

hello guys
i made a automatic kh tester with Arduino,
and the case made by 3d printer，
two dc motor and one step motor,

but i have a problem,
i was learned c++ ten years ago, just little.
now i don’t know how to save the date in a html,
the tester only can display last one result in oled.

 

[FranklinDattein]

If you open source the project you might get lucky and find a couple of people willing to help you with the missing bits...

 

[axlzys]

If you open source the project you might get lucky and find a couple of people willing to help you with the missing bits...

the code is very crude .a lot of delay() in the code.

 

[sae74]

I put together a titrator using Raspberry Pi
I have been using it for four years.
I am constantly redoing something.
Accuracy 0.1 kh compared to Hanna.

Good luck with your project!

 

[FranklinDattein]

I put together a titrator using Raspberry Pi
I have been using it for four years.
I am constantly redoing something.
Accuracy 0.1 kh compared to Hanna.

Good luck with your project!

Looks awesome! Are you planning to publish it so others can replicate, by any chance?

 

[Borat]

hello guys
i made a automatic kh tester with Arduino,
and the case made by 3d printer，
two dc motor and one step motor,

but i have a problem,
i was learned c++ ten years ago, just little.
now i don’t know how to save the date in a html,
the tester only can display last one result in oled.

I presume you use one of the RTC chips to keep track of time? Arduino's don't have a built-in clock, just a timer allowing to count milliseconds (up to 11 days).

 

[jgirardnrg]

I put together a titrator using Raspberry Pi
I have been using it for four years.
I am constantly redoing something.
Accuracy 0.1 kh compared to Hanna.

Good luck with your project!

Awesome... do you have plans on how to build this? Interested...

 

[Borat]

I put together a titrator using Raspberry Pi
I have been using it for four years.
I am constantly redoing something.
Accuracy 0.1 kh compared to Hanna.

Good luck with your project!

Nice! Almost as good as mine!

Jagshemash!..

Project AlKx : DIY Alkalinity Monitor + DIY Magnetic Stirrer

Hello fellow reefers.. Following a number of successful projects this year: - DIY light bar (https://www.ultimatereef.net/threads/diy-light-bar-100w-100cm-3-channels-pwm-dimming-temperature-control-active-cooling.890640/) - Calcium reactor...

www.ultimatereef.net

 

[sae74]

Awesome... do you have plans on how to build this? Interested...

The project is moving slowly ...

 

[elcapitan1993]

I want to build one to, but I don’t really have any knowledge on how to use Arduino or anything like that is there anyway anyone can help me?

 

[Borat]

I want to build one to, but I don’t really have any knowledge on how to use Arduino or anything like that is there anyway anyone can help me?

Help you with what exactly?

 

[elcapitan1993]

Help you with what exactly?

Like is there a walkthrough on what pieces I need and what programs I need?

 

[Borat]

Like is there a walkthrough on what pieces I need and what programs I need?

Sure, most of these projects are controlled by Arduino, a comprehensive guide on getting started can be found here:

Tutorials | Arduino Documentation

Arduino featured tutorials

www.arduino.cc

The programming part is actually the easiest one, connecting pump motors, PH board and stirrer is a bit more complicated. Generally such project is not for beginners and I would recommend to start with a simpller one..

In terms of wiring - the schematic diagaram for a peristaltic pump can be found here:

https://www.reef2reef.com/attachments/peri_pump_diagram-pdf.2352911/

 

[FTW-Reef]

hello guys
i made a automatic kh tester with Arduino,
and the case made by 3d printer，
two dc motor and one step motor,

but i have a problem,
i was learned c++ ten years ago, just little.
now i don’t know how to save the date in a html,
the tester only can display last one result in oled.

I don’t know any actual programming language, but do know a bit about them in general…would using Python language work? My understanding is that Python is fairly easy for folks to learn / use…

 

[Borat]

I don’t know any actual programming language, but do know a bit about them in general…would using Python language work? My understanding is that Python is fairly easy for folks to learn / use…

Aruino runs on C++.. however most use of C++ is very basic. If you programmed in other languages you shoulld be able to adapt to write simple Arduino programs.. But generally no to Python (and BTW it's a horrible language with almost no structure)..

 

[Red_Beard]

I don’t know any actual programming language, but do know a bit about them in general…would using Python language work? My understanding is that Python is fairly easy for folks to learn / use…

Sure, check out the pyduino. Or you could use a raspberry pi, they are python native.

 

[elcapitan1993]

Sure, most of these projects are controlled by Arduino, a comprehensive guide on getting started can be found here:

Tutorials | Arduino Documentation

Arduino featured tutorials

www.arduino.cc

The programming part is actually the easiest one, connecting pump motors, PH board and stirrer is a bit more complicated. Generally such project is not for beginners and I would recommend to start with a simpller one..

In terms of wiring - the schematic diagaram for a peristaltic pump can be found here:

https://www.reef2reef.com/attachments/peri_pump_diagram-pdf.2352911/

Thank you I appreciate that

 

[iLMaRiO]

I put together a titrator using Raspberry Pi
I have been using it for four years.
I am constantly redoing something.
Accuracy 0.1 kh compared to Hanna.

Good luck with your project!

Is this an open source project with STL to print uploaded somewhere ? I'm very interested...

 

[axlzys]

Is this an open source project with STL to print uploaded somewhere ? I'm very interested...

hello
i have an opensourcr automatic kh tester project.see my another post .

homemade automatic KH Tester With Opensource.

hello everyone, I made a KH tester machine at home.Control with Raspberry Pi. For the benefit of aquarists around the world, I decided to open source it. I upload all details to the github.com, here it is : https://github.com/axlzys/KH-Tester The case made by 3D Print, The print time of main...

www.reef2reef.com

 

[iLMaRiO]

hello
i have an opensourcr automatic kh tester project.see my another post .

homemade automatic KH Tester With Opensource.

hello everyone, I made a KH tester machine at home.Control with Raspberry Pi. For the benefit of aquarists around the world, I decided to open source it. I upload all details to the github.com, here it is : https://github.com/axlzys/KH-Tester The case made by 3D Print, The print time of main...

www.reef2reef.com

i've replied to you