Hey everyone,
Just like the thread title says, unfortunately, I lost my blue tuxedo urchin today. I would like to have a better understanding of why it has happened. I also like to know if there is anything I should do differently in the future if I want to keep another one. My tank is quite new, so I try to give as many details as I can. He was added to the tank when I had a diatom bloom and some green algae in the tank. Plenty of food for him.
Day 1 - Drip acclimated and added to the tank. Very active, wandering around the tank.
Day 2 - Still active but noticed when it moves across the glass, actually doesn't eat any of the algae just moves around.
Day 3 to 6 - Won't move, stays in the same spot. The spines are still intact, when I touch it the tube feets follow my finger.
Day 7 - After talking with the LFS, I decided to take him out and check. After checking it, it becomes very active again.
Day 8 - Less active but moves around.
Day 9 - I noticed the water became cloudy in the late afternoon, clearly a bacteria bloom. I did a stock count and everyone was still alive but didn't check the urchin as I saw him moving earlier that day.
Day 10 - Early morning I noticed my urchin was looking weird, all the spines were pointing down. I picked it up and the spines started to fall out. Checked his mouth and confirmed he is dead.
Water parameters on Day 1: Saline level 1.025sg, temperature 26C (78F), PH 8.2, NH3 - 0ppm, NO2 - 0ppm, NO3 - 5ppm.
Water parameters were checked every other day because the tank is quite new. We had a hot week in the UK and I couldn't keep the temp below 28C (82F) for days. PH at one time hit 8.4
Water parameters on Day 10: Saline level 1.026sg, temperature 28.5C (83F), PH 8.0, NH3 - 0ppm, NO2 - 0ppm, NO3 - 0ppm.
About the tank:
-90gal fish only, running for 6 weeks in total, cycled in 3 weeks. Fishless cycle, at the end of the cycle it was able to process 4ppm NH3 in 24hrs. After the cycle, I did a 75% WC and since that, I do a weekly 15% WC.
-Canister filter, 60ppi sponge filter, 6Kg (13lbs) of filter media (biohome), filter floss and I also started to use activated carbon in the last 2 days
-HOB protein skimmer
-40Kg (88lbs) crushed coral sand bed (course)
-18Kg (40lbs) dry rock
-60Watt / 8400 Lumen LED light bar
-8000LPH wave maker
Water was made by the LFS, they use RO water with 0ppm TDS and the saline level is always 1.025sg.
The tank was rapidly stocked since cycled (last 3 weeks), water parameters were checked daily and never had a second mini cycle only a moderate diatom bloom. But that already seems to be settled now.
Current stock list:
-2 Common clownfish
-1 Firefish goby
-1 Blue cheek goby
-1 Coral beauty dwarf angelfish
-1 Lawnmower blenny
-1 Purple tang
-1 Brown sailfin tang
-4 Red leg hermit crabs
-9 Banded trochus snail
-1 Pacific cleaner shrimp
-1 Fire shrimp
-1 Peppermint shrimp
-1 Blue tuxedo urchin (now dead)
What went wrong? Starved to death? I had plenty of diatoms and some green algae in the tank. High water temps made him stressed? I already ordered a chiller to stabilize the temperatures during heat waves.
Just like the thread title says, unfortunately, I lost my blue tuxedo urchin today. I would like to have a better understanding of why it has happened. I also like to know if there is anything I should do differently in the future if I want to keep another one. My tank is quite new, so I try to give as many details as I can. He was added to the tank when I had a diatom bloom and some green algae in the tank. Plenty of food for him.
Day 1 - Drip acclimated and added to the tank. Very active, wandering around the tank.
Day 2 - Still active but noticed when it moves across the glass, actually doesn't eat any of the algae just moves around.
Day 3 to 6 - Won't move, stays in the same spot. The spines are still intact, when I touch it the tube feets follow my finger.
Day 7 - After talking with the LFS, I decided to take him out and check. After checking it, it becomes very active again.
Day 8 - Less active but moves around.
Day 9 - I noticed the water became cloudy in the late afternoon, clearly a bacteria bloom. I did a stock count and everyone was still alive but didn't check the urchin as I saw him moving earlier that day.
Day 10 - Early morning I noticed my urchin was looking weird, all the spines were pointing down. I picked it up and the spines started to fall out. Checked his mouth and confirmed he is dead.
Water parameters on Day 1: Saline level 1.025sg, temperature 26C (78F), PH 8.2, NH3 - 0ppm, NO2 - 0ppm, NO3 - 5ppm.
Water parameters were checked every other day because the tank is quite new. We had a hot week in the UK and I couldn't keep the temp below 28C (82F) for days. PH at one time hit 8.4
Water parameters on Day 10: Saline level 1.026sg, temperature 28.5C (83F), PH 8.0, NH3 - 0ppm, NO2 - 0ppm, NO3 - 0ppm.
About the tank:
-90gal fish only, running for 6 weeks in total, cycled in 3 weeks. Fishless cycle, at the end of the cycle it was able to process 4ppm NH3 in 24hrs. After the cycle, I did a 75% WC and since that, I do a weekly 15% WC.
-Canister filter, 60ppi sponge filter, 6Kg (13lbs) of filter media (biohome), filter floss and I also started to use activated carbon in the last 2 days
-HOB protein skimmer
-40Kg (88lbs) crushed coral sand bed (course)
-18Kg (40lbs) dry rock
-60Watt / 8400 Lumen LED light bar
-8000LPH wave maker
Water was made by the LFS, they use RO water with 0ppm TDS and the saline level is always 1.025sg.
The tank was rapidly stocked since cycled (last 3 weeks), water parameters were checked daily and never had a second mini cycle only a moderate diatom bloom. But that already seems to be settled now.
Current stock list:
-2 Common clownfish
-1 Firefish goby
-1 Blue cheek goby
-1 Coral beauty dwarf angelfish
-1 Lawnmower blenny
-1 Purple tang
-1 Brown sailfin tang
-4 Red leg hermit crabs
-9 Banded trochus snail
-1 Pacific cleaner shrimp
-1 Fire shrimp
-1 Peppermint shrimp
-1 Blue tuxedo urchin (now dead)
What went wrong? Starved to death? I had plenty of diatoms and some green algae in the tank. High water temps made him stressed? I already ordered a chiller to stabilize the temperatures during heat waves.