Hi I have a chiller rated for a flow rate of 100-160 gph and need a pump recommendation. I have about 4ft of 1/2" ID tubing going into the chiller and 4ft going back.
Chiller pump reccomendation
- Thread starter ReefDestroyer38592
- Start date
-
- Tags
- chiller
Have similar head heights and flow requirements for my 1/10 HP jbj chiller and the Sicce syncra silent 1.5 has worked very well for me. Maybe the 1.0 is all you need
OP
OP
My main question is do I calculate the head loss totalling 8 ft of tubing? Or only from pump to chiller?
Last edited:
here’s a good article. In short yes you do factor in the total tubing distance but lift distance is factored in differently than return line distance.
www.simplicityaquatics.com
How to Estimate the Head Pressure on Your Return Pump - Simplicity Aquatics
Most pumps are listed with GPH (gallons per hour) flow rates to give you an idea of how much water they will move, however this number is with zero head pressure. In reality, most aquarium return pumps have a good amount of head pressure against them, so the flow rate at zero doesn’t necessarily...
www.simplicityaquatics.com
OP
OP
Appreciate the reply!here’s a good article. In short yes you do factor in the total tubing distance but lift distance is factored in differently than return line distance.
How to Estimate the Head Pressure on Your Return Pump - Simplicity Aquatics
Most pumps are listed with GPH (gallons per hour) flow rates to give you an idea of how much water they will move, however this number is with zero head pressure. In reality, most aquarium return pumps have a good amount of head pressure against them, so the flow rate at zero doesn’t necessarily...
Similar threads
