Can I still save this?

WalkerLovesTheOcean

I love acans
View Badges
Joined
Jan 27, 2024
Messages
5,719
Reaction score
28,898
Location
New York State
Rating - 0%
0   0   0
I received a used 125 gallon 6 ft tank a few days back. I'd like to try my best to save it, but I'd like to know if this chip and seam are concerning. There are lots of bubbles in the seam. Is that because it is separating? I plan to completely reseal the tank if I am keeping it. TIA.

20240810_152754.jpg
20240810_152041.jpg
 
OP
OP
WalkerLovesTheOcean

WalkerLovesTheOcean

I love acans
View Badges
Joined
Jan 27, 2024
Messages
5,719
Reaction score
28,898
Location
New York State
Rating - 0%
0   0   0
Is this tape residue on the glass exterior or something that extends into the seam?

1723335055881.png


Any of the other seams have bubbles? Seam above the chip in the first pic looks like more air than silicone.
That's tape residue. None of the seams are as bad as the one pictured.
 

Sassafras

Community Member
View Badges
Joined
Feb 17, 2019
Messages
88
Reaction score
207
Rating - 0%
0   0   0
If I'm seeing right, the chip looks very shallow, almost surface only. The bubbly seam would concern me more than the chip, although the tank may have been in service like that from day one-just poor workmanship on that seam.
 
OP
OP
WalkerLovesTheOcean

WalkerLovesTheOcean

I love acans
View Badges
Joined
Jan 27, 2024
Messages
5,719
Reaction score
28,898
Location
New York State
Rating - 0%
0   0   0
If I'm seeing right, the chip looks very shallow, almost surface only. The bubbly seam would concern me more than the chip, although the tank may have been in service like that from day one-just poor workmanship on that seam.
Yeah I have no idea what the background is of the tank. All I know is that it is 28 years old. Probably never sealed since manufacturing.
 

EricR

2500 Club Member
View Badges
Joined
Jun 9, 2021
Messages
2,569
Reaction score
2,738
Location
California USA
Rating - 0%
0   0   0
Yeah I have no idea what the background is of the tank. All I know is that it is 28 years old. Probably never sealed since manufacturing.
If you're going to strip it down and rebuild it, maybe replace that one pane of glass?
...or is it two panes at the same place? (can't tell from the picture)
 
OP
OP
WalkerLovesTheOcean

WalkerLovesTheOcean

I love acans
View Badges
Joined
Jan 27, 2024
Messages
5,719
Reaction score
28,898
Location
New York State
Rating - 0%
0   0   0
If you're going to strip it down and rebuild it, maybe replace that one pane of glass?
...or is it two panes at the same place? (can't tell from the picture)
I believe it's only one pane but will have to look closer tomorrow.
 

Sophie"s mom

Valuable Member
View Badges
Joined
Oct 25, 2023
Messages
2,243
Reaction score
3,282
Location
Va.
Rating - 0%
0   0   0
I received a used 125 gallon 6 ft tank a few days back. I'd like to try my best to save it, but I'd like to know if this chip and seam are concerning. There are lots of bubbles in the seam. Is that because it is separating? I plan to completely reseal the tank if I am keeping it. TIA.

20240810_152754.jpg
20240810_152041.jpg
Looks to like the chip is not a big deal, but that seam!all air bubbles! Worth saving, yes, but I would definitely re do the seams. It’s a lot of work, but for a 125, worth the effort. To me at least.
 
OP
OP
WalkerLovesTheOcean

WalkerLovesTheOcean

I love acans
View Badges
Joined
Jan 27, 2024
Messages
5,719
Reaction score
28,898
Location
New York State
Rating - 0%
0   0   0
Looks to like the chip is not a big deal, but that seam!all air bubbles! Worth saving, yes, but I would definitely re do the seams. It’s a lot of work, but for a 125, worth the effort. To me at least.
After all I did get this tank for free... I guess that's what I get?
 

Sassafras

Community Member
View Badges
Joined
Feb 17, 2019
Messages
88
Reaction score
207
Rating - 0%
0   0   0
I'm no expert. I have built a tanks your size from new glass, but never dismantled and reassembled an old tank. I can tell you one thing. Cleaning the old silicone off the glass so there is absolutely NONE left is crucial. Pretty big job on a 125, but certainly doable, even if it is your first time.
 

Mschmidt

Average Maybe
View Badges
Joined
Feb 9, 2022
Messages
15,864
Reaction score
36,022
Location
Baltimore
Rating - 0%
0   0   0
The chip wouldn't bother me, but you could also about the whole issue by moving the the in .25 inch when you reseal.

I've resealed smaller tanks, 55 being the largest. If there's a rim, you want to pull that off first. I'd run a razor down all the seams pealing the bead off the inside. Then cut all the way through the silicone bonding the two panes. Peal all the silicone of the glass. You'll want many razor blades for this. Then clean with rubbing alcohol. Tape off the glass so you will have clean lines when finished. Put a head on the bottom and all sides being bound. Id put one side fist then both ends, then the other long side. Make sure there are no gaps without silicone. Then runt he internal bead and smooth it out. Painters tape will help hold things together while it cures.

Serpa design has some helpful videos on the yous tubes.
 
OP
OP
WalkerLovesTheOcean

WalkerLovesTheOcean

I love acans
View Badges
Joined
Jan 27, 2024
Messages
5,719
Reaction score
28,898
Location
New York State
Rating - 0%
0   0   0
The chip wouldn't bother me, but you could also about the whole issue by moving the the in .25 inch when you reseal
What do you mean?

I am pretty confident in my ability to reseal. It's just redoing the seams that would scare me.
 
OP
OP
WalkerLovesTheOcean

WalkerLovesTheOcean

I love acans
View Badges
Joined
Jan 27, 2024
Messages
5,719
Reaction score
28,898
Location
New York State
Rating - 0%
0   0   0
Thank you for trying to keep it out of the landfill, the chip does not look concerning.
Yup, I would hate to throw it out. It's a lot of glass with nothing really wrong with it. Good to know the chip isn't concerning. Thank you.
 

felda001

Getting old sucks. Beats the alternative though
View Badges
Joined
Jun 2, 2024
Messages
3,577
Reaction score
7,516
Location
Peoria
Rating - 0%
0   0   0
I think you can save it. It’s going to be a lot of work. My understanding of the process is you remove all the old silicone, clean all the glass really well, reassemble and resilicone. Then you allow it to cure and hope. Final step is to water test.
 
Back
Top