Calcium Chloride question

Kyle Rinker

Active Member
Review score
+0 /0 /-0
View Badges
Joined
Feb 15, 2017
Messages
139
Reaction score
149
Review score
+0 /0 /-0
Rating - 0%
0   0   0
I've been starting to use Randy's recipe #1 for my mixed reef tank. Like many other folks, I have been unable to find Dow Flake anywhere around me. However, Lowes carries SafeStep Extreme 7300, which the company fact sheet lists as "pure CaCl2". I mixed my first batch today and all dissolved very well with no solid precipitates. However, while the solution remains clear, it does have a yellow tint to it.
I have uploaded a photo so you can see what I am talking about. The solution on the right is the calcium chloride. The solution on the left is the 2 part magnesium mix from BRS. There is a very clear distinction in color.
I am wondering if anyone else has experienced this. I worry it will not be safe to use. Any advice? Thanks.

View attachment calcium.jpg
 
Nutramar Foods
OP
OP
Kyle Rinker

Kyle Rinker

Active Member
Review score
+0 /0 /-0
View Badges
Joined
Feb 15, 2017
Messages
139
Reaction score
149
Review score
+0 /0 /-0
Rating - 0%
0   0   0
For what it is worth and in case anyone else ever stumbles upon this issue, I used an API ammonia test to check out my calcium chloride solution. Using the saltwater scale, the reading came out at 4 ppm. I'm not sure how accurate this is considering the concentration BN of the solution but it was riddled with ammonia regardless. I did not even bother testing phosphates.
 
Nutramar Foods

Randy Holmes-Farley

Reef Chemist
Review score
+0 /0 /-0
View Badges
Joined
Sep 5, 2014
Messages
58,891
Reaction score
52,911
Review score
+0 /0 /-0
Location
Arlington, Massachusetts, United States
Rating - 0%
0   0   0
For what it is worth and in case anyone else ever stumbles upon this issue, I used an API ammonia test to check out my calcium chloride solution. Using the saltwater scale, the reading came out at 4 ppm. I'm not sure how accurate this is considering the concentration BN of the solution but it was riddled with ammonia regardless. I did not even bother testing phosphates.

I agree that ammonia can be a concern in additives, and I tested Dowflake and other hobby grades for ammonia and found some but not enough to worry about.

But realistically, 4 ppm is not likely a substantial concern for daily dosing. Suppose you boost the tank by 20 ppm calcium per day (a pretty large dose). How much ammonia is that adding?

To boost calcium by 20 ppm using my Recipe #1 takes 0.205 L added to 100 L of aquarium water.

So the dilution factor is 0.205/100 = 0.002.

Thus the ammonia at 4 ppm drops to only 0.002 x 4 ppm = 0.008 ppm.

So even if you add that all at once, it isn't going to reach a toxic level in the aquarium.
 
OP
OP
Kyle Rinker

Kyle Rinker

Active Member
Review score
+0 /0 /-0
View Badges
Joined
Feb 15, 2017
Messages
139
Reaction score
149
Review score
+0 /0 /-0
Rating - 0%
0   0   0
Thanks, Randy. That's why forums like this are invaluable to me. I am still concerned about what other impurities maybe in this salt mix, considering how it turned the RO water yellow. Is that perhaps the bromide in the solution? I should state it started out colorless but within 10 minutes had a slight yellow hue and the longer it set the darker the color got, up to about 5 hours past the point of mixture.
 

Randy Holmes-Farley

Reef Chemist
Review score
+0 /0 /-0
View Badges
Joined
Sep 5, 2014
Messages
58,891
Reaction score
52,911
Review score
+0 /0 /-0
Location
Arlington, Massachusetts, United States
Rating - 0%
0   0   0
Right. I really don't know if that material is adequately pure or not, and to determine it is OK either takes a fair amount of trial and error testing by many folks, or expensive testing.
 
www.dinkinsaquaticgardens.com

wcharon

Active Member
Review score
+0 /0 /-0
View Badges
Joined
Feb 24, 2010
Messages
374
Reaction score
160
Review score
+0 /0 /-0
Location
PR
Rating - 0%
0   0   0
Randy... is there a substitute for Downflakes or BRS Calcium Chloride??? The shipping costs to Puerto Rico is getting me crazy.

Please give me some insights and thanks in advance...
 

Randy Holmes-Farley

Reef Chemist
Review score
+0 /0 /-0
View Badges
Joined
Sep 5, 2014
Messages
58,891
Reaction score
52,911
Review score
+0 /0 /-0
Location
Arlington, Massachusetts, United States
Rating - 0%
0   0   0
You probably do not get Prestone Driveway Heat since you don't get much ice and snow. lol

Some folks use Leslies Pool calcium chloride.
 
Top Shelf Aquatics

wcharon

Active Member
Review score
+0 /0 /-0
View Badges
Joined
Feb 24, 2010
Messages
374
Reaction score
160
Review score
+0 /0 /-0
Location
PR
Rating - 0%
0   0   0
You probably do not get Prestone Driveway Heat since you don't get much ice and snow. lol

Some folks use Leslies Pool calcium chloride.

jajajjaja Randy that's true. I will check in a local pool store to see what I get or Amazon.

Damp-Rid is calcium chloride

Thanks. I will checkit at Amazon.

Also Mrs. Wagners (Pickling products) makes a calcium chloride (crisper) product.

Thanks. I will check it at Amazon also.
 
Corals.com

Polyp polynomial: How many heads do you start with when buying zoas?

  • One head is enough to get started.

    Votes: 27 10.6%
  • 2 to 4 heads.

    Votes: 145 57.1%
  • 5 heads or more.

    Votes: 65 25.6%
  • Full colony.

    Votes: 10 3.9%
  • Other.

    Votes: 7 2.8%
Legendary
Back
Top