I'm searching for a cooling fan that can be used/controlled through the Hydros Control 4 Drive Port, but haven't been able to find any online.
Can anyone recommend any?
Can anyone recommend any?
Best fan to use with Hydros Controller
- Thread starter reefpat
- Start date
OP
OP
any tips on how to DIY one and which parts would I need?
I've used this fan for 10 years and never had an issue with it breaking, plus its more powerful and cools down tank very quick. Wont work with the port but reliability IMO is more important
- Joined
- Jun 17, 2013
- Messages
- 3,219
- Reaction score
- 1,882
- Review score
- +0 /0 /-0
- Location
- Cedar Park, Tx
Get a Cooler Guys IP67 rated fan the size you need that is 12v. If you are not good at soldiering you can get a drive port extension cable and cut it and splice it into the fan cable using wire nuts. Make sure you get the polarity right for the fan. There are usually three wires on the fans now but only two are used in this case. The fans have a standard connector used with computers so it should not be hard to find a pinout for the connector on the fan. Here is a pinout of the Hydros connectors
forum.coralvuehydros.com
Full DIY Hydros Pinout Cheat Sheet
Here is the full summary of all current Hydros ports for DIY purposed. Use at your own discretion. This is provided for reference purposes only. UPDATED FOR NEW XD DEVICE! Notice that the XD supports higher current 12V devices now.
forum.coralvuehydros.com
OP
OP
Thanks for this man, really helpful!Get a Cooler Guys IP67 rated fan the size you need that is 12v. If you are not good at soldiering you can get a drive port extension cable and cut it and splice it into the fan cable using wire nuts. Make sure you get the polarity right for the fan. There are usually three wires on the fans now but only two are used in this case. The fans have a standard connector used with computers so it should not be hard to find a pinout for the connector on the fan. Here is a pinout of the Hydros connectors
Full DIY Hydros Pinout Cheat Sheet
Here is the full summary of all current Hydros ports for DIY purposed. Use at your own discretion. This is provided for reference purposes only. UPDATED FOR NEW XD DEVICE! Notice that the XD supports higher current 12V devices now.
- Joined
- Apr 28, 2021
- Messages
- 763
- Reaction score
- 558
- Review score
- +0 /0 /-0
- Location
- Fort Walton Beach, FL
Wow really? I have a fairly loud 6" fan in my sump area that doesnt seem to cool that well. Crazy that these little 140mm fans work that well up top. What is the house temp? Maybe that's my issue. Its set to 77 in the day and only 75 in the evening.
Blowing into the sump that has obstructions does not work well, it creates turbulent air that cannot cool effectively.
Blowing across the water surface works shockingly well. My home is 80, and a single fan easily keeps the tank below 79. If the fan was left on it would take the tank <77. Evaporative cooling is great! Uses gallons from the ATO though
Last edited:
- Joined
- Apr 28, 2021
- Messages
- 763
- Reaction score
- 558
- Review score
- +0 /0 /-0
- Location
- Fort Walton Beach, FL
I have the whole back of the stand open to help with getting some heat out but I guess its not enough. I have some spare 120 and maybe 140mm pc case fans that I might do a temp setup to see how well it works. Ill design and print out a mount sort of like you have and give it a shot. How are you powering those? Just a small transformer?
I can email you the STLs if you message me your email address.
I power and control these via the apex 24v accessory port. You can get a 12v version and use them on the Hydros 12v drive port.
The ports are programmable based on temperature so the fans only come on when you need them.
Did you end up setting a fan with Hydros? Looking to do the same myself by this coming summer here in FL. I like the white fans from GHL but not looking to do soldering...
Doesn’t GHL propeller breeze line include a standard power adapter that you can plug into a Hydros outlet? Doesn’t need to be drive port.
Or, you can make an adapter if it must be drive port.
Or, you can use the 0-10v output of the Control4 to have variable fan speed on the GHL unit. (With diy adapter)
Sweet. If you want an unnecessary amount of control, you can control them via 0-10v output of Control4. Minimize the amount of sound when only a little cooling is needed.
(Ex. 25% at 78.5, 50% at 79, 100% at 79.5)
Propellor Breeze with Propellor Control lets you control the fans with 0-10v.
PropellerControl-2.1 - Aquarium Fan Controller - GHL
The GHL PropellerControl-2.1 enables the ProfiLux controller to operate the Propeller Breeze 3 with variable-speed control. Once connected to a 1-10V interface on the aquarium controller, the Propeller Breeze 3 will automatically adjust its fan speed according to how much the set temperature is...
www.bulkreefsupply.com
Control4 outputs 0-10v.
Propellor-Control accepts 0-10v.
Just two wires to join em, and you have speed control.
yep I'll probably plug into the XP8 and just use that on full speed until the temp gets where needed. Thought the variable speed would be nice to have as an option (maybe quieter). Might have to finally use that solder iron I bought last year. Not sure what all it would take at this point.
What two wires do you join to make this work?Propellor Breeze with Propellor Control lets you control the fans with 0-10v.
PropellerControl-2.1 - Aquarium Fan Controller - GHL
The GHL PropellerControl-2.1 enables the ProfiLux controller to operate the Propeller Breeze 3 with variable-speed control. Once connected to a 1-10V interface on the aquarium controller, the Propeller Breeze 3 will automatically adjust its fan speed according to how much the set temperature is...
Control4 outputs 0-10v.
Propellor-Control accepts 0-10v.
Just two wires to join em, and you have speed control.
Similar threads
