CasperOe
Well-Known Member
- Review score
- +0 /0 /-0
UK Reef Club Member
Build Thread Contributor
- Joined
- Feb 14, 2022
- Messages
- 645
- Reaction score
- 686
- Review score
- +0 /0 /-0
- Location
- Glasgow, United Kingdom
Hi Reefers
I am planning to add automation to my ATO compartment using the Neptune Apex.
Here is how I am planning to do it; please do comment, advise and criticise (.. if you must!). Any previous experience along these lines will be greatly appreciated.
Aquarium side:
Water storage side:
Cheers!
I am planning to add automation to my ATO compartment using the Neptune Apex.
Here is how I am planning to do it; please do comment, advise and criticise (.. if you must!). Any previous experience along these lines will be greatly appreciated.
Aquarium side:
- 1/4” push fit connections will be drilled in the back compartment of my Cade aquarium
- Two sensors will be in the back compartment
- Neptune LLS 39” sensor for overall water volume
- 1 x Neptune optical sensor for overfill protection
- Neptune Leak detector(s) around the base of the tank
Water storage side:
- Neptune Energy Bar (for future upgrades)
- 1/4” RO tubing will be fed from my RO container to the tank
- Neptune PMUP pump placed in the RO container
- Check valve in between?
- 1 x Neptune optical sensor for low level shut off
Cheers!