Reply to thread

Neptune

Message: <blockquote data-quote="KeepAFish" data-source="post: 11130082" data-attributes="member: 207121"><p>I was looking at doing something very similar and implementing multiple solenoids to accomplish it.  I have not had a chance to review the code completely, but I am not a seasoned expert in Fusion either. Please let us know how it goes.</p><p></p><p>I highly recommend redundancy with float valves, multiple types of sensors, etc.  I usually focus on figuring out anything that could go wrong and try to address that as much as possible. I assume everything will fail at some point. I am sure you will monitor everything closely for a while before you fully trust the code.</p><p></p><p>You mentioned it can take 12+ hours to fill. I like the idea of using a when on statement to turn it off if the max time to fill is ever exceeded.  Another concern is that if your ATO or salt reservoir is full, it may not be willing to fill the other until the sensor is open again -probably not a concern, just something to be aware of.</p><p></p><p>For my own benefit,  what are you using for your acc ports?</p></blockquote><p></p>

Verification

Please Introduce Yourself Here!