Misbar
Active Member
I've made the hard decision to stop with my 60 gallon Petco tank build. I simply do not have the time to put everything together and maintain it with my work schedule.
As of now everything is being sold as a complete package.
$2,100 OBO. I am not shipping anything, but willing to meet up or even deliver to your house if you're close enough.
Here's what you get:
60 gallon acrylic tank and ~30 gallon acrylic sump. Tank is 48x24x12in of 3/4in acrylic. Sump is 30x14x16 1/4in of 3/16in acrylic. Also included is a 5 gallon glass tank with lid and led light for the ato reservoir.
Tank is in great shape considering that it was used as a Petco display frag tank. It has minor scratches (as expected with acrylic) mostly on the bottom panel.
Aluminum stand is 48x24x30in. It comes with doors. As you can see it also comes with a 4 bulb t5 fixture. I placed 2 ATI Blue plus, 1 ATI Coral plus, and 1 ATI Purple plus bulb in it (all brand new, haven't been used yet other than for testing). I started a diy eggcrate screen lid. If you want it I will send you the rest of the materials for it.
Equipment:
2 Orphek OR3 120 blue plus LED bars (tested, but never used).
Skimmer (came with tank. fully adjustable).
Sicce Syncra Pro 1,000 GPH (for return pump)(tested, but never used)
Sicce Syncra Pro 550 GPH (for skimmer)(tested, but never used)
Sicce Syncra Silent1.0 251 GPH (for carbon reactor)(2 years of use)
AquaMaxx Deluxe 100 GPD RO/DI (never used)
IceCap Battery Backup v3 (for Maxspect wavepump)(never used)
Maxspect Jump 2k Controllable Gyre Pump (tested, but never used)
Reefbreeders Prism ATO (tested, but never used)
200 watt BRS titanium heater w/ controller (never used)
BRS 5" single mini reactor (never used)
ESV 50gal Salt mix starter kit (never used)
ESV 100gal Salt mix (As seen with bucket)(never used)
BRS rox 0.8 carbon (never used)
BRS 7x16in felt filter sock (never used)
BRS 7x16in mesh filter sock (never used)
Aquamaxx 7in acrylic filter sock holder (holds 2 socks)(never used)
Hannah Alkalinity Colorimeter (never used)
Salifert Mg, NO2, PO4, NO3, Ca, and NH3 test kits (Some have expired by now, I will have to double check)
Tropic Marin Hydrometer (never used)
Digital and strip thermometers (never used)
2 Digital outlet timers (each timer has 2 outlets)(tested, but never used)
2 K&J plastic coated neodymium magnets (for the gyre pump, because the original magnets are too weak for 3/4")(tested, but never used)
MarinePure ceramic bioballs (never used)
60lbs of CaribSea Fiji Pink sand (Never used)
A bit of dry rock (as seen in tank)(never used)
2 24x24in ABS Black Plastic sheets (if you plan on going bare-bottom)(never used)
That's most of it. I also have some soft plumbing (only used for testing), hose clamps, random fittings and return nozzles etc. for an herbie conversion. Take it all if you want. There's other stuff I forgot to get pictures of like the brand new gate valve and check valve. The tank also came with a skimmer and a frag rack/stand which is not currently pictured.
All you need to do is find a way to mount the leds and your basically good to go.
Thank you for taking the time to read through everything. This is a one of a kind tank I hope somebody can set up and enjoy!
Take a look at my build thread for more pictures, thanks again
As of now everything is being sold as a complete package.
$2,100 OBO. I am not shipping anything, but willing to meet up or even deliver to your house if you're close enough.
Here's what you get:
60 gallon acrylic tank and ~30 gallon acrylic sump. Tank is 48x24x12in of 3/4in acrylic. Sump is 30x14x16 1/4in of 3/16in acrylic. Also included is a 5 gallon glass tank with lid and led light for the ato reservoir.
Tank is in great shape considering that it was used as a Petco display frag tank. It has minor scratches (as expected with acrylic) mostly on the bottom panel.
Aluminum stand is 48x24x30in. It comes with doors. As you can see it also comes with a 4 bulb t5 fixture. I placed 2 ATI Blue plus, 1 ATI Coral plus, and 1 ATI Purple plus bulb in it (all brand new, haven't been used yet other than for testing). I started a diy eggcrate screen lid. If you want it I will send you the rest of the materials for it.
Equipment:
2 Orphek OR3 120 blue plus LED bars (tested, but never used).
Skimmer (came with tank. fully adjustable).
Sicce Syncra Pro 1,000 GPH (for return pump)(tested, but never used)
Sicce Syncra Pro 550 GPH (for skimmer)(tested, but never used)
Sicce Syncra Silent1.0 251 GPH (for carbon reactor)(2 years of use)
AquaMaxx Deluxe 100 GPD RO/DI (never used)
IceCap Battery Backup v3 (for Maxspect wavepump)(never used)
Maxspect Jump 2k Controllable Gyre Pump (tested, but never used)
Reefbreeders Prism ATO (tested, but never used)
200 watt BRS titanium heater w/ controller (never used)
BRS 5" single mini reactor (never used)
ESV 50gal Salt mix starter kit (never used)
ESV 100gal Salt mix (As seen with bucket)(never used)
BRS rox 0.8 carbon (never used)
BRS 7x16in felt filter sock (never used)
BRS 7x16in mesh filter sock (never used)
Aquamaxx 7in acrylic filter sock holder (holds 2 socks)(never used)
Hannah Alkalinity Colorimeter (never used)
Salifert Mg, NO2, PO4, NO3, Ca, and NH3 test kits (Some have expired by now, I will have to double check)
Tropic Marin Hydrometer (never used)
Digital and strip thermometers (never used)
2 Digital outlet timers (each timer has 2 outlets)(tested, but never used)
2 K&J plastic coated neodymium magnets (for the gyre pump, because the original magnets are too weak for 3/4")(tested, but never used)
MarinePure ceramic bioballs (never used)
60lbs of CaribSea Fiji Pink sand (Never used)
A bit of dry rock (as seen in tank)(never used)
2 24x24in ABS Black Plastic sheets (if you plan on going bare-bottom)(never used)
That's most of it. I also have some soft plumbing (only used for testing), hose clamps, random fittings and return nozzles etc. for an herbie conversion. Take it all if you want. There's other stuff I forgot to get pictures of like the brand new gate valve and check valve. The tank also came with a skimmer and a frag rack/stand which is not currently pictured.
All you need to do is find a way to mount the leds and your basically good to go.
Thank you for taking the time to read through everything. This is a one of a kind tank I hope somebody can set up and enjoy!
Take a look at my build thread for more pictures, thanks again
