3D printer recommendation

[Smokeshow]

Well guess what finally showed up

 

[Projects with Sam]

Well guess what finally showed up

Clean lookin' bunny!



Just got my BL touch working on my Extended Ender. Printer was useless without it. Waiting out dealing with GD drivers for custom Marlin paid off... It now seems like a non-issue with Marlin 2.1.x (2.1.2).

 

[Smokeshow]

I used tinkercad to make a simple stand for my protien skimmer and used cura to slice it. It started out good but not its got these waves going.

 

[Townes_Van_Camp]

Bed leveler for whatever your get!

Feeler gauges. Know your machine.

 

[Smokeshow]

I used a piece of paper lol. But I got the sonic pad with my ender and used the 25 point auto bed leveling after I did the manual level

 

[((FORDTECH))]

I used tinkercad to make a simple stand for my protien skimmer and used cura to slice it. It started out good but not its got these waves going.

This looks like it may just be the infill in a normal pattern for the inside of whatever item you designed that pattern and density can be changed in the settings before you slice

 

[Projects with Sam]

What is your print speed set at? Check your rollers; you may have something stuck to a wheel. Thats why linear bearings are nice...

If you carriage is too tight the wheels wear over time then gunk accumulates on the races and then transfers to the wheels.

 

[Smokeshow]

That one was printing at 60. Creality PLA + at 190c 60c bed. Was also before I added the sonic pad. Ran a temp tower and found 205c was the best. And made the bed 65c. I printed a 3/4 turbulent flow last night and it turned out perfect. Started some 3/4 loc-line segments before I left for work. Have a blink camera set up to monitor it while I'm out but won't know for sure how they turned out until I get home.