240G Acrylic aquarium, filtration overflow question

kathouqc

New Member
View Badges
Joined
Mar 16, 2024
Messages
11
Reaction score
1
Location
Quebec
Rating - 0%
0   0   0
Hi, I just bought a 240G and I want to make it able to filter with a 90G sump.

The aquarium size is: 72x32x24

Both big hole on each side is at 6" from the side panel, and both hole are drill at 2 1/4".

Has I bought use, what I can do for a filtration with a sump with these two hole?

I want a least 2000Gph
431521021_445920241197650_1831200645387036489_n.jpg
20240405_115447.jpg
20240405_115501.jpg
20240405_115504.jpg
 

lapin

10K Club member
View Badges
Joined
Dec 16, 2017
Messages
10,876
Reaction score
18,041
Location
Austin
Rating - 0%
0   0   0
Most people would use something like this.


However with just 1 hole and Im not sure the bulkhead size you have, 2 of the smaller versions will not move enough water.
 
Upvote 0
OP
OP
K

kathouqc

New Member
View Badges
Joined
Mar 16, 2024
Messages
11
Reaction score
1
Location
Quebec
Rating - 0%
0   0   0
Most people would use something like this.


However with just 1 hole and Im not sure the bulkhead size you have, 2 of the smaller versions will not move enough water.
the hole in the aquarium are 2 inch and 1/4 of diameters so kinda big I would say
 
Upvote 0

RocketEngineer

Well-Known Member
View Badges
Joined
Sep 3, 2019
Messages
999
Reaction score
1,091
Rating - 0%
0   0   0
Based on the hole size that’s likely a 1-1/2 schedule 40 bulkhead. Measure in mm and be sure to get a good measurement to be certain.

You say this is acrylic tank, then I would drill it for a large overflow box and use those two holes for returns.

JMO
 
Upvote 0
Back
Top