Smite
2500 Club Member
I'm breaking down my 180g and want to gauge interest in the setup, if none then I got some hoarding to clear out in my garage, hahhaha.
System is under 2 years old. Delivered 12/2018 was wet about 1/1/2019.
Starphire standard dimension 180 gallon display built by MODE aquariums. My memory is crap but I'm 95% sure the eurobracing is 3"x 3/4" thick. The bottom is 3/4" and the rest is 1/2". Front and sides starphire glass. External 2400 GPS modular marine overflow. 3 x 1.5" drains.
Stand steel powder coated light grey. It is 39" tall with 6 adjustable feet. I framed it out right side electrical compartment left side dosing compartment but those can easily be removed and a large sump ran. All doors are removable and have 6 counter sunk high strength/ coated magnets. It's a very firm pull to remove. I consider child safe. My 6 year old cant get it open. I'm lazy butt so the doors only got primed with Killz. Still needs a top coat. I did add a step on the inside so doors stay level with one another. Topped with marine grade 3/4" plywood painted black. I used contact cement and adhered the supplied mode tank pad so it doesnt move around.
*stand needs to be recoated. Has some slight surface rust.
Sump is no name and has some hazing. Included with plumbing/fittings but treating this as a freebie.
I'll scrape all coraline before I drain it, aside from the overflow. There are a few light scratches that are hardly noticeable when filled.
$800 but save me the bs offers I'll store it for emergencies before I go too low.
I paid $2500 for the tank and stand. Thats not overflow plumbing, fittings ect.
HIGH end acros also talk but trades will need to be valued closer to the 1k mark *
System is under 2 years old. Delivered 12/2018 was wet about 1/1/2019.
Starphire standard dimension 180 gallon display built by MODE aquariums. My memory is crap but I'm 95% sure the eurobracing is 3"x 3/4" thick. The bottom is 3/4" and the rest is 1/2". Front and sides starphire glass. External 2400 GPS modular marine overflow. 3 x 1.5" drains.
Stand steel powder coated light grey. It is 39" tall with 6 adjustable feet. I framed it out right side electrical compartment left side dosing compartment but those can easily be removed and a large sump ran. All doors are removable and have 6 counter sunk high strength/ coated magnets. It's a very firm pull to remove. I consider child safe. My 6 year old cant get it open. I'm lazy butt so the doors only got primed with Killz. Still needs a top coat. I did add a step on the inside so doors stay level with one another. Topped with marine grade 3/4" plywood painted black. I used contact cement and adhered the supplied mode tank pad so it doesnt move around.
*stand needs to be recoated. Has some slight surface rust.
Sump is no name and has some hazing. Included with plumbing/fittings but treating this as a freebie.
I'll scrape all coraline before I drain it, aside from the overflow. There are a few light scratches that are hardly noticeable when filled.
$800 but save me the bs offers I'll store it for emergencies before I go too low.
I paid $2500 for the tank and stand. Thats not overflow plumbing, fittings ect.
HIGH end acros also talk but trades will need to be valued closer to the 1k mark *
