https://techenclave.com/threads/my-diy-aquarium-build-the-good-the-bad-and-the-ugly-anoxic-filtration.202272/
I used 3mm tile spacers, pinched the nozzle and injected silicon in between the glass panes. All 3 tanks, 3 sumps done the same way. Neat and almost zero bubbles. No leak test needed as...
I was wondering if anyones had success using a dab of silicon on their suction cups? I know magnets are prefered, but I just don't have that options ATM. Would love to hear people's experiences.
Thanks!
hey all
Q: what's the diameter of silicon tubing i should be obtaining for this pump's pressure side - contacting eheim they stated: 'The diameter of the pressure side is 28 mm.' it has threaded barbs
(can provide pictures if needed)
just looking for some advice here as i intend on purchasing...
Hi. First time poster here.
I purchased a new 50gal tank and stand a week ago. Was have it a look at the tank to see how it’s settled on the foam pad, while doing so I noticed some bubbles in the outer silicon close to a corner at the bottom, inner seal is fine. Not sure if I should get it...
Quick and to the point I used this silicon to secure my baffles. https://www.homedepot.com/p/GE-10-oz-Silicone-Cartridge-GE-55/202038071
But now I'm doubting my choice and wanted either the ok that it's good or someone to tell me it's wrong. Doesnt have anything in its specs about anti mildew or...
Hi everyone. I just posted a couple days ago about an emergency I was having with my tank. All my fish were dying after switching to a new sump. I thought it was because I switched the sand, or because the heater was up too high which killed off the bacteria; however, I found the culprit. I...
Hi all.
I have a new tank with a supplied sump that I want to modify. The modification is to remove a glass partition that is siliconed into the sump.
What is the easiest and safest way to cut through the silicon and remove the partition.