reefkeeper

Box O' Digital Aquatics Reefkeeper stuff 4 Powerbars - All Outlets Worked when I took them down 1 SLX Module 1 SL2 Module (Salinity) 2 Head units 1 Net Module 1 New Float Module 1 Old Float Module (needs work) 2 Beat up spliced back together temp probes - need replacing - there is a thread...

Hi. I’m looking for a Digital Aquatics SLX, SL1 or SL2 module. I will pay trough PayPal on eBay. Thank you.

See the link below, I simply put a microfit 3.0 connector on these, I figured someone without the crimping tool might want one. From what I read on Amazon, you can change NO/NC by flipping the float. Please see amazon for reviews, I cannot take responsibility for the reliability of the float. I...

I have a Reefkeeper Elite V2 head unit, a Reefkeeper Lite head unit, 4 PC4 power bars (one slightly split on side), an RKM-ALC module, an SL2 V2 module, an SLX module, a NET module, 2 temp probes, 3 ph probes, the SID adapter for computer interface, and all the cables you could want for sale...

I switched over to apex. I just want to sell this whole lot of the last of my ReefKeeper stuff. No splitting. Archon head unit (antenna plastic broke but wifi works fine) SW 1.09.52 HW 1.08.10 4x PC4s (all have at least 1 stuck outlet, one might be all good) 2x SL1 1x SL2 1x molex temp probe...

Bought this with plans on using it, but got an Apex. See pics for everything it has as I may miss something. Prefer to sell as a package. Asking $200 shipped. Located in North Baltimore. V2 Display SID V2 PC4 X2 RKM-SL2 MLC with 2 lights Temp probes Salinity Probe Multiple Cables...

Hey guys was cleaning the fish room and I get some stuff to get rid of, Apex unit, not sure where the face is, I connected it to 192.168.0.50:80 and can access fusion, it also comes with two probes(and magnetic probe holder). Shoot me an 200obo on that cause I’m not sure of a price without the...

Used Reefkeeper Lite aquarium controller. All outlets work as they should and the unit has been updated to the latest operating system version. Comes with everything pictured including the SL1 module and connecting cable, temp probe, and SID V2 cable to connect it to a computer. Sometimes I had...

So this is a really long post, I’ve put everything in categories such as; lights, pumps, skimmers, etc so you can scroll down to whatever you’re looking for. I’ll attach more pics. I could only do up to 25. If something isn’t priced well then make a reasonable offer. -Lights- -XR15 G3 Pro...

I’m at point where I’m considering to sell my reefkeeper and buy a new apex. I have so much invested on it as you can see on the picture but must of the pumps have they own controllers. I’m using the reef keeper less and less. What you guys opinion? Have you switch from the reefkeeper to the...

digital aquatics reefkeeper lite. I’ve had for several years and hasn’t let me down one time. Come with display power bar and temp probe. The probe works but could use replacing.

I'm looking for an aquarium controller for $150 or less. I know it's a limited budget but figured an old RKE, Archon, AquaController, or even an RKL if that's all I can get. May also consider a Seneye so I can test my PAR. I want to be able to monitor temp & salinity while able to control a few...

Very good working condition Reefkeeper Elite package with 3 PC4s, Net module SL1, SID V2, Temp and PH probes and bunch of bus cables. Everything works great, I am also including a internet access point for use with the net module. I have a frame I built for the head unit I can also include. I...

I have a handful of stuff to get rid of. Everything priced with shipping included to the lower 48. Please pm an offer if the price is higher than you’re willing to pay and we’ll go from there. 2 WAV Pumps I took these on a trade and then ended up buying a couple MP10’s. One of the pumps has a...

Hello! Could someone please help me understand how to setup the Reefkeeper Dosing pump DP1 ? I don’t understand how to configure it in the software. Thank you !

Reefkeeper Elite +Net. Comes with; -1 SL1 module with temp and pH probe. -1 MLC module (missing the actual moon lights but you can get them for around $10) -3 PB4’s which is 12 controllable outlets. -1 SID V2 cable for plugging in to your computer. -6 bus cables varying lengths. All the...

Im looking for a reefkeeper iTemp probe or the old school temp probe. Either way it needs to have the RJ connector/phone jack connector on the end, not the little black two prong connector that the more recent probes have. I have an old reefkeeper 2 (I believe it’s the model before the elite and...

I have been stewing about this for weeks since I found out that Digital Aquatics aka ReekKeeper has finally closed it's doors. Even though it was no real shock because there was no service or updates for a very long time, the official word of their demise still has a significant impact. First...

I upgraded to the Apex since I travel. I used these two in conjunction to control my tank. I also have a BRS Double Junction Lab Grade Probe which was used with the RKL that I will include with the ReefKeeper. The probe is approximately two months old and is stored in proper liquid currently. I...

BRStv calls this system "the best combination of ease of use, features, and cost which makes it one of the best values" (see video on link below). Never used ReefKeeper Elite Controller from Digital Aquatics with the following: * ReefKeeper Elite Head Unit (RKM-GC1) * ReefKeeper SLX module...

Reefkeeper Lite controller with two PC4's [8 outlets total] SL1 [2 temperature probes - one iTemp and one standard probe] * iTemp probe is used, the standard temp probe [connects to SL1] is brand new... used <24hrs - Can also monitor pH, ORP and use the SL1 as a switch [ATO] - only...

Hello! I’m just getting started in SW, though I’ve had FW for years. I’ve got a BC29 and am looking ahead to see if it’s worth getting a controller like reefkeeper or the like now, or if I should get the various timers, probes, etc. separate add ons and upgrade later. What have other members...

Looking for a Reefkeeper NET Module if anyone has one. Also a SL2 Module to swap out my SLX for. I don't use ORP so Salinity would come in pretty handy.

3 x PC4 (12 outlets) 4 x float switches GC1 - Elite Head Unit SL1 module NET module Temp probe pH probe SID - System Interface Device Make me an offer

Hey everyone my name is Alex, I created this thread to show my journey through building my nano zeovit tank. I would also like this to be an open discussion for anyone else with a zeovit system or anyone who is thinking about starting one! This first picture is where i started and the rest...