over flow

Do I need to support the plumbing coming from the overflow? I’m doing bean animal so there are a lot of pvc. But it coming straight down and forward.

Eshoppes over flow box just trickling. Any advice.

Hi! I am new to salt water tanks and I have just recently gotten a 75g display tank with a 29g sump. My tank is not drilled yet (that is something that I will be doing soon). My biggest question is do I need to match the GPH being drained and the GPH of the return pump? I know that I shouldn't...

so I’ve had this tank over a year. Always struggled keeping coral and maintaining water quality. it’s only 60L and exactly the same as the Fluval Evo except slightly taller + a filter grid at bottom (see pic) I’ve noticed a surface biofilm problem despite good agitation, and my filter floss on...

So Im new to owning a sump and when i first set it up the flow was PERFECT then after a month it randomly decided to stop matching eachother (a fish got in the overflow and it started acting funny and now i cant get it corrected). Im not too fond of sumps to be honest but the water is returning...

So I have a green chromis stuck in my overflow and no matter what i cant net him because hes so fast, anyone know how to get him out??

I’m working on finishing the plumbing on my tank and was hoping for some advice on the return line outlets. I dual have 1 inch return lines each on a separate pump. I want to have minimal plumbing in the tank and was planning on just using the bulkheads without any additional nozzles/loc...

Hello all! I just bought a used system off someone and have been trying to get it all up and running over the last few days. Today I was finally able plug in the return pump and try to dial in the overflow, but holy cow was it super loud. Like loud to the point that I woul get rid of the tank...

Good morning. I've tried to gain insight from other posts but I think I'm still missing some key insights to solve my problem. Bottomline: Noisy overflow and noisy sucking sounds from my tuning holes (see below). Inability to suitably tune the water height in the side sump to make the noise...

I just purchased this tank and setup, I believe it to be a marineland 90 gallon corner-flo. There should be a front panel on the overflow, it was removed for some reason by the previous owner. Does this panel serve a legitimate use? Has anyone had any luck on finding a replacement; I have...

Hello I ordered a Aqua lifter pump to add to my overflow, and I just found out that it won’t be coming. I picked this pump because it was the only one that I have heard of being used the way I am trying to. I’m planning on using it to remove the air bubbles from my overflow and keep the siphon...

What’s up reef2reef I took a little break for a while but I’m back!! So my next project is too hopefully set up a sump for my 29 gallon tank. First thing I don’t want to drill my tank so I am planning on buying a overflow the one I am interested in is the PF-300 overflow perfect for my nano...

Hey all! As most of you probably know I’m in the process of a very slow build. I’ve decided I’m going to get my tank from Glass Cages as the size I’m going with (84x25x25) is significantly less than other manufacturers, and their record for CS is impecable under @Joe Glass Cages. As I’m...

Sorry I just saw this. Need to clean them all up. I have one Aqua-lifter and some tubing I can include also. Prices do not include shipping. CPR CS90. Newer, purchased after posting this. I was using on a frag setup. (600 GPH)$100 CPR CS50 It will need a new bulkhead unless you want to plumb...

I just configured this overview and I basically had to put the water level in my overflow box extremely close to the tank water level in order to prevent all of the noise from the water falling into the overflow. Also my emergency pipe has about 1/8 " clearance from the water line. Does this...

Hello all, I have a 20 gallons nano reef tank and I have an Innovative Marine Desktop Skimmer installed. I suppose the skimmer is working properly but every now and then the bubbles over flow the cup. Does anybody knows how can I control this? I've tried searching for answers online but very...

I knew the basement floor was unlevel, it with my custom coast coast overflow *48 inch. i still am only getting 3/4 of the length letting water in. I believe the right side lowered 1/8 at the most would solve the problem. Unfortunately this is a custom design I did, and the overflow does not...

I woke up this morning to a pump running dry, I was a little disoriented at first, But then I quickly realized it was a snail in the overflow, Question is how do I build a emergency? I only have 2 Holes in my tank.

-New synergy shadow overflow ($140) -New finnex heater and controller ($90) -Used reef octopus calcium reactor with Milwaukee ph controller ($120) - Used yourchoice aquatics dc pink skimmer rated up to 500 gallons ( $200) -Used brs dual media reactor with mj pump ($40) You pay shipping.

1-Skimmer- Simplicity 120 lightly used, less than 6 mo old. $140 shipped 2-Two Little Fishies kalk reactor 300. $45 shipped 3-Reefkeeper HOB overflow. $45 shipped 4-Lg acrylic frag rack (holds 65 frags). $40 shipped 5-Little Giant Pump 2-MDQX-SC. $75

I bought a ReefSavvy 21" ghost overflowthat flows 2000 gph for a new aquarium build I'm doing. Of course, my plans changed. It's brand new and was never installed. ReefSavvy doesn't accept returns, so my loss your gain. To get all the info on the overflow, Google: "reef savvy ghost overflow 21"...