nano build

Hello everyone! I'm pretty new to the hobby and started building my first tank about a year ago. I've been taking very slow steps forward in the hopes that I wont mess anything up :grimacing-face:, but nevertheless here is my current tank set up. It's a far cry from most of the other systems...

Just wanted to post this for those who may be looking to do a similar thing , I am currently starting a nuvo 10 frag tank which will be able to hold about 140-160 frags and going to tie into main apex / trident from im nuvo 40 across the room for monitoring Just wanted to stress this IKEA...

Innovative Marine Nuvo Fusion 15 System: 15 Gallons Launched 7/20/24 ATO: Prism Mixed Reef: Soft, LPS, small SPS in the future Corals: 5 Fish: 2 - Nearly naked Clownfish (George), Twin Spot Goby (Also George) Cleanup Crew: Blue Leg Hermits, Nassarius Snails, Trochus Return Pump: Sicce Sincra...

I currently have my eshopps nano skimmer in the left rear corner of my fluval evo 13.5g, and in the past it has been collecting gunk but I haven’t had to clean it out for a while now. I’m wondering if it is actually picking anything up now that I have a wavemaker flowing towards the opposite end...

Hello everyone, I am a long time lurker here but I finally have something that might be worth sharing! I have had a Fluval Evo 13.5 AIO tank for about 2 years now and I ended up with a second one so I am starting a new build (which I will also retrofit to my other tank if it works well)...

Once again a very huge thank you to @Rubymoon286 for this amazing Secret Santa gift!! Obviously didnt take me long to rip the wrapping paper of and get started! Behold the beginning of The Winter Reef! My first venture into a nano tank :) - Deskmate Classic 5g - using the included pump for...

Note: This first post is constantly updated. The last update was on Oct 22, 2024 Current Tank Picture - As of Oct 22, 2024 Current Equipment List Aquarium: Waterbox 15 Peninsula AIO Lights: AI Prime 16 HD with Arm Return Pump: Jebao DCS 1200 DC Pump Screen Lid: Waterbox Heater: Aquatop 100w...

I’ve been in the hobby for about 3 years now. Just started over on a new tank. Here it is! It’s a nano.

Hey all! I've never posted a build thread but always wanted to. Been deep in and out of the freshwater hobby my whole life and have dabbled in keeping a FOWLR system in the past, but I'm ready to graduate on to the world of reefing. I decided I'd go with something small that can easily be moved...

reposted on nano build section

I've been reefing for around 7 years now, starting in the hobby when I was 17. My first reef was a fluval m60 which ended up being still one of my best tanks to date. This tank was upgraded to a red sea 170 which was also a success. I ended up taking some time out the hobby due to university...

Hello everyone, I've been out of the hobby for about 6 years but i had been quite active in the hobby prior to that dating back to 2002. I had 3 tanks in the past, a 85 gallon half hex, 29 biocube, and 20 gallon standard tank. My kids are now at the age where they have taken a real interest in...

First tank in several years (First ever was in 2007), I made the cardinal sin of choosing a smaller tank, and I have already started planning the upgrade, should be about September when I start piecing that together, will be a 75g Innovative Marine INT. For now, the IM 20g Fusion Pro (first gen)...

Hi all, I built a little acrylic tank as a proof of concept to see how it would go and it was good, so I wanted to use it to make a "Micro/Nano reef", the tank is 30cm*30cm*50cm (W*L*H). Was thinking I would have a cm or so of sand than some small rock and not sure if I would have a fish or...

I’ve been saving up, studying, and working hard to save up $$ -I put some money aside for either a 90 gal discus tank or end my SW hiatus... Finally hit arange where I can acquire a somewhat decent nano aquarium. Going bare-bottom w/ dry rock with only 1-2 fish (NO CLOWNFISH since I refuse to...

Hi reefers! I am using this build thread to document my journey to rescue two baby clownfish and to seek help along the way. The Mission: Nurse 2 clownfish babies back to health. See background: https://www.reef2reef.com/threads/rescuring-2-baby-clownfish.900102/ TDR: They came from a...

Here's my build thread. I'll try and start from the beginning when I started before ending up with the 20gallon AIO I have now. May take me a few days to find pics and get them posted. Here's how it started: A Fluval Chi 5g (was freshwater, but the pump failed and I decided to repurpose), a...

Hi everybody! I just wanted to thank everyone for the amazing information you all post on a daily basis. Here's my story! I'm back in the aquarium hobby after 30 years (haha had a bunch as a kid) and started my first Reef tank in October last year. Here are the specs: Fluval flex 9 AI Prime...

Hello, I have a larger reef on our main floor but working from home gave me the urge to build a small office tank using leftover equipment and some DIY. The tank is far from done, but just kinda taking my time with it and having fun. I always enjoy seeing the interesting ideas of everyone’s...

Short version: Would love to document my journey on a BTA tank build and share some info with a community that has given me so much knowledge. There will be a few things that I will be trying out for the 1st time and a lot of time tested stuff I have discovered through trial and error on...

Hello Everyone, So recently I bought the 22.4 Gallon Rimless Nano Tank from FijiCube off of bulk reef supply. I wanted to hear suggestions on my build and hear any thoughts and concerns. I'm very happy with this build and I'm very excited to start reefing but before I start aquascaping I want...

Greetings all! This is going to be my build log/tank progression thread for my new 29 gallon display/10 gallon sump project. Currently running a modded fluval evo 13.5, which while getting me into and helping me learn the hobby, I would like an upgrade. My original idea was to save up for a...

I should have started this thread from the beginning, but oh well! I'm only a few weeks into it, so I'll start a list of my equipment and add some photos here as things progress. Aquarium: Waterbox Peninsula 15 gallon Stand: DIY 2x4 stand wrapped in plywood and painted. Heavy duty leveling feet...

This is mostly copied from my introduction meet and greet post, but I wanted to consolidate the information here in my build thread! Below is an overview of my current setup: Display Tank (DT) Tank: Innovative Marine Fusion Pro 25 Gallon Lagoon (w/ overflow protection and hightide risers)...

Edit: Fish Plan! Thanks to all for the feedback/recos, I really appreciate it! First aquarium from scratch! :) grew up with a 45g that I adored as a child, so my mom surprised me with an Evo 13.5 for my 26th birthday! Tank/Equipment: Fluval Evo 13.5g, stock light & pump, hygger 1,600GPH wave...