So much talk of Red Sea tanks leaking on a weekly basis on forums, Facebook groups, Instagram, TikTok, YouTube, etc.... so I thought I'd collect some data out of curiosity. I will share the results with sensitive info removed on 12/31/2024.
If you unfortunately had a Red Sea tank leak on you...
My Fluval EVO 13.5 AIO is reaching it's 6 month mark, with issues arising and being resolved. However this time, I have something that has began to reoccur that I'd like to ask more experienced reefers on their opinions and troubleshoot less, opposing troubleshooting once a month when the issue...
1st Tank: anenomes attacked zoa colony 2 days later everything was dead. (1.5years)
2nd tank: had to shut it down for a move. (1.5 years)
3rd tank: red sea reefer 250 leaking from the seam at the bottom, we tear down again. (6months)
Time for 4th tank! I have a 125 fresh water tank sitting...
hello, I am dealing with another leak in the overflow box I sealed up the leak between joints but discovered a leak coming from the weir bulkhead. I have read a few threads about how to set the box up correctly and had it set up that was but it’s still leaking (weir, gasket , glass , gasket ...
TLDR at the end
Hey everyone, I have been leak testing and solved a few plumbing/bulkhead leaks but I’ve never come across the problem with the actual overflow box leaking. It is leaking from the bottom where the back of the box meets the bottom of the box. I’m thinking it could be 2 things...
Hi guys!
A few days ago I bought a new tank, so I've been working on plumbing it for the past few days the emergency PVC pipe is leaking and I just can't find a way to fix it, it is leaking from the top of it where it connects to the overflow box, I already added Teflon tape, and the leak...
I waited a bit to post about it till i had finished with both insurance and reef factory.
So Feb 5th i get a message from my GHL Profilux about a leak.... i rush home and find the middle floor where the tank is flooded, the staircase to the 1st floor aswell as the first floor full of water.
I...
I have a leak coming off of the manifold valve and I don’t understand why or what I can do. The valve is fully closed and yet it seems to be leaking directly from the valve, not even from the bottom of it.
If nobody here has a suggestion, I’ll contact WB, but as this is actively leaking, I need...
I bought a second hand Red Sea tank and recently I noticed some whitish stuff on the silicone seams. I never filled the tank, I think the white stuff is some residual salt from previous use. My questions: will this be noticeable when I fill the tank? Any way to remove it? Do you think there is a...
I need some advice. We purchased a second hand RSM 250 in late February of this year and have been modding/experimenting with extreme yet careful luck. I am a lifetime freshwater aquarium keeper, but this is my first saltwater… It also helps that I have a doctorate in chemistry. The tank is full...
I'm a newb. The long story is posted here: https://www.reef2reef.com/threads/a-beginners-story-dilemma-and-question-cry-for-help-bought-a-beautiful-260g-that-was-full-now-has-leak-after-professional-move-what-do-i-do.1005503/
That link above is the story of my finding a great working 260g tank...
(Long story- but I'm a details guy. I need some help from the community!)
I recently bought a house with an alcove under the stairs that was perfect for a nice big reef tank, and a built-in look. I've always wanted one. I was researching for weeks looking to get into the hobby, and find the...
My Aquamax HOB Multi filter with protein filter (https://www.bulkreefsupply.com/aquamaxx-hf-m-hang-on-back-multi-filter-with-protein-skimmer.html) Is leaking out of the seams and I need to know how to fix it before I get 2-3 gallons of water dunked onto my carpet.
It is about a year old now and...
Hi all, I'm hoping for some tips on repairing a leak. I have a Waterbox 130.4 that's been running for a little over 2 years. Two nights ago my water sensor went off, and I found a small but steady leak coming from the bottom back-right corner.
I was able to remove a small corner of the thin...
I’ve had my Fluval Evo for 2 months thus far and have had no issues whatsoever. I’m beginning to become attached to this tank and really enjoy it. However, I’ve read reviews online of some that have experienced leaking out of nowhere, even after months of owning it. How can this be avoided? Or...
Just purchased and installed. Ran and noticed small leaks on the top where drain and return lines plug in. Realized there should be a gasket here, checked box and didn't see any. Also checked online and saw no mentions of this or discussion anywhere. No instruction manual anywhere.
Am I...
The display seem on my Red Sea 250 blew within minutes after noticing several sand particles filling the bottom middle seam. 4-5 years old. Captured 80% of the water by the time I grabbed an empty brute trash can and currently housing my livestock and rock in another trash can. Hardwood floors...
Hello,
I’m in California and finding it challenging to get a renters insurance policy that would cover potential damages of the property that I’m renting in case of a tank failure. I’m not looking to cover my aquarium or livestock, just the property damage itself. I’ve done some research but...
Found a chip in the bottom corner of my waterbox 35.1 x sump after buying it the other day. Unfortunately, I do not want to chance the risk of a leak as it will be on the second floor and carpet. Does anyone have any recommendations for a sump that would fit in a 16 x 16 space / have an idea as...
Should I reseal 300 g 8’ glass cages tank? It does not leak, although has flat nonsticky silicone on one corner and a chip in another corner. If so what type of silicone is ideal and can it just go over old silicone as long as it still touches glass? What about placing new pieces of glass on...
Should I reseal 300 g 8’ glass cages tank? It does not leak, although has flat nonsticky silicone on one corner and a chip in another corner. If so what type of silicone is ideal and can it just go over old silicone as long as it still touches glass? What about placing new pieces of glass on...
I was cleaning my 55g aquarium and I flipped it over to inspect it further. It seems that some of the bottom trim flexes a little when I try to push against it.
Is this structurally concerning? It doesn't seem to leak from what I could tell - it's been holding water for days.
A little over 3 year old Reefer 250 front seam about to fail. we noticed a few days before Christmas that sand was seeping into the front seam, honestly ignored it for a few days. it rapidly got worse with more and more sand pouring into the seam, did some searching in this forum and was...
Last night the gasket on my canister filter broke, and the only other filtration I have right now is a hang on back filter rated for a 30g tank and mine is a 55g. Also all it’s running is biomedia. Do y’all think this would be fine until my new gasket comes? It should arrive on the 11th of next...
Hello!
I was having a couple of issues with my Aquamaxx HOB 1.5 and wanted to share my solutions. Photos included.
Issue #1: the seal/stopper for the collection cup is poor AND/OR the skimate was too wet AND/OR the water level rose too high in the skimmer
Issue #2: the seal between the box and...