aquarium stand

Hey guys, I’m new to reef tank keeping and am starting up a 75 gallon. When I was cutting out a place in my stand for the bulkheads, I might’ve taken out a little too much… is this okay to put water in the tank with the stand like this? The broken part is just the plywood on top of the main...

Where does everyone who built there own stand by there t slot rails and hardware? Pictures from tenecor.

For folks in Spokane/N. Idaho region: I built this stand to replace my old one. It is 3/4 Rustic hickory cabinet plywood. There is a defect in the veneer on the left side panel and I've decided to start over. It is structurally sound otherwise. I could patch, sand, and paint this but that's not...

Selling and APS stand from innovative marine for a 50 gallon INT aquarium. Only a year old. Black. No scratches or marks.

Hi, I built my aquarium stand myself, and bought prefabricated wood panels for the doors from my local hardware store. I cut them to size, sanded them, and finished them with india ink and then polyurethane. My problem is it looks like the two middle doors (in front of the sump) are warping...

Hey Everyone, This is going to be the build thread for my DIY AIO 20 Gallon Long Reef. Everything was built from scratch. This idea has been in my head for years, and has finally come to fruition. To begin, I designed the stand. I work from home (even before COVID came around) and wanted to...

I was tight on space and looked high and low for a good size match for Fluval Evo 13.5. Just wanted to save others time if they are in the same boat. This worked very well as an Evo stand; nearly the same size so little extra wasted space...

Going through my phones gallery, I noticed that I have built quite a few stands :D Thought it would be nice to see what other people have been building lately for some future project inspiration! Here's a few I've completed (most of them for others) Show us what you've built! A Maple 35 Gal...

$475. Local pickup only in League City, Texas. 77573 White tank stand that will fit a 75/G or 90/G. It has Blum 110* soft close hinges. It’s sealed with silicone on the top and bottom. Cut-outs for cords and American DJ power strips on both sides for quick toggle on/off power w/o an Apex. Also...

I'm trying to find something to use for a stand for a 75 that's drilled at the bottom and I can't build my stand this time sadly. So if anyone has some suggestions that would be great. I don't want to spend a lot of money on it but I also don't want one of those cheap black stands.

Hey guys! So I know it can be a pain in the butt to find a stand for our nano tanks. If you dont want to spend a stupid amount on a stand check this one out. Just got it set up for my 10 gall cube. Holding no issues. Has Iron legs and 2 metals tiers to hold it together. Hope it saves you some...

Hey Everyone- I have an acrylic frag tank that is 36L x 20W x 12H . I've thoroughly searched for a stand that properly fits the tank, but the closest I can find is 50L x 19.625W ... The issue is finding a stand with the proper width. The overhang will less be than a 1/4 of an inch on each...

The Best Way To Organize Your Aquarium Marine Depot Controller Boards Are Here!

I think I'm going to go with 80/20 T-Slot Aluminum for my 120 gallon tank stand. I've browsed the internet and found a W-I-D-E range of prices, so I thought I would reach out to the members here who've actually had stands made by various Vendors. *** Please share any 80/20 Vendors that have...

**Updated! More Items Added! Hi, my name is Seth and I've decided to get out of hobby. My wife and I are having another baby and I just don't have the time to properly care for my tanks anymore. I'm not listing everything because I still have a tank going, but I am listing a couple things as I...