aio

Just picked up this drop in manual fleece roller for my IM 40L AIO. Really happy with the placement next to the protein skimmer but I have a question. What do I put in the open space at the base of the plastic towards the cone end (pictured). It looks like a place for additional filter media...

Oddball AIO penn-plax tank I won, wouldn't have ever paid money for this thing. The tank was free, so extra funds to put into other equipment or livestock, I guess?I had a pico tank a few years ago that unfortunately crashed and I'd like to try saltwater again. Holds just under 11 gallons filled...

These are custom printed media baskets with lids,you can load up on all of your favorite media with these. most tanks require 3 to 4 in each media chamber. I do have a small stand that goes under them or you can use a filter sponge.there has to be something on the very bottom for flow to the...

Is there someone that can walk me through how to properly setup my automatic fleece roller, specifically how to determine the correct height to place the ATO float switch in the rear chamber of my AIO? I have a 20 Gallon IM Nuvo Fusion Pro 2 AIO. Currently I have the Tunze Nano ATO float switch...

I'm setting up my dosing lines in the return chamber of the rear of my AIO. When I put the return pump in feeding mode, the water in the rear of the AIO reaches the dosing lines (which includes my ATO line). Is this an issue? Is there a chance for siphoning (either into or out of the tank)? When...

Hello all, I just placed an order and am planning on building with the below items. Any advice or help is appreciated. Reefer MAX 200 G2 system AIO 200w titanium heater with inkbird 40 Lbs LifeRock Dry Live Rock - CaribSea 20 lbs Special Grade Arag-Alive caribsea dr tims one and only/...

I purchased the tunze 9004 DC unit and placed it in the far right rear chamber (of aio) figuring this would be the best placement, but I cannot get it to produce any foam. I realize it being placed in this chamber it will not do any surface skimming other than what is being skimmed from the tank...

Hello! The purpose of this post, and future posts, is both for newcomers and for my own selfish reasons. I’m going to be starting a 25G AIO and will note as much of the process as possible. I want to help create a standard guide for those with similar goals and hope in return to receive advice...

Hey everyone, I was playing with the idea of building a sump/refugium in my AIO chambers for my waterbox 25 peninsula. I removed the black backing so I could see back there and I definitely think I could do it. Anyone experimented with this? Couldn’t find any pictures or videos online that...

Hello, I’m hoping for your help I’m about to start my first tank and I wanted to get a gauge on practicality. It’s my first tank and I’m going for relative simplicity, I would love any advice. I’m going to get a 25 gallon peninsula aio. Due to size and other factors I will not be using a sump...

I've got a brand new Waterbox 15 gallon peninsula tank all in one. It's still in the box it was shipped to me in. I just dont have the time to do another tank. I also ordered the mesh lid. With shipping and tax I paid almost $350. I will let it go for $225.00. If you need pictures thats fine...

Finally getting around to selling my old setup. Tank is an Innovative Marine SR-80 Pro 2. It was set up for about 2 1/2 years before I upgrade to the SR-120. No leaks while I had it running and seals are in good shape. There is one small scratch on the front pane and some on the black acrylic...

As the title suggests, I'm looking for thoughts on what to put in each of the three filter chambers for my WB 25 Peninsula AIO tank. I have been testing weekly and I am not controlling nitrates well. To keep nitrates low, I have to do multiple water changes a week right now. Currently, I just...

Hello! So many places referenced R2R as an amazing resource, so I decided to join and document my journey with my first saltwater tank! I have two successful small freshwater planted aquariums and I'm looking forward to seeing what new challenges this will bring. I first set up this tank on...

Hello! I have my 20 gallons IM AIO 4 months ago. Everything went good until like 2 weeks ago. I start having issues with the alkalinity all the other parameters are stable but the alkakinity is going up every day. Today: -O2: 8 mg/L -Sal: 1.025 SG -Alk: 11.8!!!!! ??? (It was at 11.2 and is...

Hey everyone, I have this Landen 6OP (26g: 20g display, 6.23 AlO sump) that came with a 185gph wave controlled return pump. have the return pump set to 100% on wave mode. I have a Nero 3 on the left glass slightly towards the front of the tank running on Random mode 10%-45% high interval, 2.5"...

Innovative marine Nuvo fusion 20 gallon. Comes with 2 custom caddy’s. I have the lid but don’t have the clips since I didn’t use the lid. Clips are cheap to buy. Kessil a360 light with gooseneck mount. Photo is not with Kessil. Asking $225 pick up in Caldwell, NJ. Can also meet at Sea Level...

Link to Original Build Thread - This will be an office tank. Table of Contents Tank 1 - Broken - This Post Tank 2 - Delivery Unboxing Stand with Plywood Skin We Have Water!!! Lights On!!! AI Blade Grow Extra Equipment List Equipment List (9/19/24) Tank - HelloReef 15 AIO Filtration - FireAqua...

Would you always go for a predrilled tank? Or prefer the standard? What reason? The standard version plus a hob overflow cost nearly the same as this seapora drilled.

Not new to reefing but new to an AIO. I had a 180g w a sump but have since downsized to IM 25g lagoon and am having lots of trouble. I started w a sicce synced silent 1.0 pump and it seemed like it was pushing water faster than it can drain. I have since downsized to the same pump just the .5...

My biocube 32 just turned 1 year old today! What a fun event. So many times over the last year I was not sure we would get here! From hair algae that took over and refused to die to the aptasia and bubble algae that still pop up every so often to the death of my beloved Georgie the clownfish...

Hello all, I just setup a small 12 gallon AIO that I am going to use to keep and grow out frags and small corals. I am planning to keep some live sand as well as a little rumble of live rock on the sand and then 4 frag racks on the stand covering above the sand. My question is would it be ok and...

office tank that was running for 4 months. Full system with LED light, return pump and heaters, green box has lights for macroalgae. everything is ready to run. tank is flawless and high quality ( UNS ) 35.5x13x10(including AIO box) the tank itself is L x W x H: 35.5" x 7.9" x 9.9" rocks and...

Total noob question here: are the AIO and display sections of a tank supposed to maintain roughly the same water level? I’m setting up an IM SR-80. After we installed the ATO, the display section water level jumped up way too high (almost half an inch from the top) while the back remained a...

I’ve wanted a saltwater tank since I was a kid, and I finally made it happen just in time for my birthday. New to all of this- all advice is appreciated :upside-down-face: Boon Lagoon Est. 3.14.2024 as of 3.20.24 : TANK / STAND Tank: IM Fusion Pro 2 - 50 AIO Lagoon Stand: IM APS Stand...