- Shipping
- Shipping Available
Two BRS 2 Part Dosing Pump - Two for the price of one!
Both pumps were used on a previous build and only for 2-3 months (estimated total of 10 hour run time) before being switched out. They both run great and I have confirmed they have no air leaks when properly connected to tubing. These pumps are the slower 1.1mL/min version but dose very accurately. With the BRS recommended 12-month tube replacement (at 4 hours per day) these pumps are essentially brand new.
Price: $70 for the pair. Shipping cost split based on buyer zip code.
Note: One mounting bracket has the top tab broken off. This has no affect if mounted vertically (standard way) in any way. This is almost purely cosmetic unless you are trying to mount these upside down
BRS Provided Specs:
BRS Provided Information:
The BRS 1.1 mL dosing pump is a very cost-effective yet long lasting stand-alone dosing pump perfect for trace elements and 2 part. By hooking the pump up to a simple timer or aquarium controller they can be one of the most inexpensive ways to get into an automated 2 part dosing system. With their peristaltic design, they will not back siphon and provide extremely accurate flow rates.
BRS 2 Part Dosers are intermittent duty pumps and not meant for continuous operation. We recommend on/off cycles under a few hours to maximize lifespan. You will need two pumps in order to dose both calcium and alkalinity. When used with controllers like the Apex, we recommend connecting these to a mechanical relay outlet, and not a TRIAC outlet on the controller's power bar.
Both pumps were used on a previous build and only for 2-3 months (estimated total of 10 hour run time) before being switched out. They both run great and I have confirmed they have no air leaks when properly connected to tubing. These pumps are the slower 1.1mL/min version but dose very accurately. With the BRS recommended 12-month tube replacement (at 4 hours per day) these pumps are essentially brand new.
Price: $70 for the pair. Shipping cost split based on buyer zip code.
Note: One mounting bracket has the top tab broken off. This has no affect if mounted vertically (standard way) in any way. This is almost purely cosmetic unless you are trying to mount these upside down
BRS Provided Specs:
- Max Head: 20ft
- Average Output: 1.1mL per Minute*
- Dimensions: 4" x 3.25" x 4.5"
- Power Consumption: 3W @ 120VAC
- Tubing Type: Santoprene
BRS Provided Information:
The BRS 1.1 mL dosing pump is a very cost-effective yet long lasting stand-alone dosing pump perfect for trace elements and 2 part. By hooking the pump up to a simple timer or aquarium controller they can be one of the most inexpensive ways to get into an automated 2 part dosing system. With their peristaltic design, they will not back siphon and provide extremely accurate flow rates.
BRS 2 Part Dosers are intermittent duty pumps and not meant for continuous operation. We recommend on/off cycles under a few hours to maximize lifespan. You will need two pumps in order to dose both calcium and alkalinity. When used with controllers like the Apex, we recommend connecting these to a mechanical relay outlet, and not a TRIAC outlet on the controller's power bar.
- Silent operation
- Extremely accurate
- Will not back siphon
- 12-month tube life (at 4 hours of use per day)
- 24-month Bulk Reef Supply warranty on pump motor and head
